Chevrolet Silverado Key Fob Battery Replacement Guide (2019 – 2021)

Introduction

Replacing the battery in your Chevrolet Silverado key fob is a simple task that can save you time and money. This guide will walk you through the process step-by-step, ensuring you can do it quickly and easily at home.

What You’ll Need

Before starting, make sure you have the necessary tools and materials. You will need:

• Flathead screwdriver
• CR2032 coin battery

If you don’t have a CR2032 battery, you can purchase one from Amazon.com.

Step-by-Step Instructions

Follow these steps to replace the battery in your Chevrolet Silverado key fob:

Step 1: Remove the Internal Key

Locate the button on the side of your key fob. Hold down the button and pull out the internal key. Set the key aside for now.

Step 2: Open the Key Fob

Using your flathead screwdriver, find the keyhole where the internal key was. There is a small slot in the middle of this area. Insert the screwdriver into the slot and gently turn it like a key. The back section of the plastic will start to click off. Gently pull it off with your fingers.

Step 3: Remove the Old Battery

Once the key fob is open, you will see the battery. Use the flathead screwdriver to get under the battery and lift it up. Remove the old battery and dispose of it properly.

Step 4: Insert the New Battery

Take your new CR2032 battery and make sure the positive side (the side with the plus sign) is facing down. Line it up with the battery housing and snap it into place.

Step 5: Reassemble the Key Fob

Click the two halves of the key fob back together. Ensure it is securely closed. Finally, reinsert the internal key.

Additional Tips

Here are a few additional tips to help you with the battery replacement:

• Work on a clean, flat surface.
• Keep all parts organized.
• Be gentle to avoid damaging the key fob.

FAQs

What if my key fob has a different number of buttons?

As long as your key fob has the same design and metal part, you can follow the same steps.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from Amazon.

How often should I replace the key fob battery?

It is recommended to replace the battery every 1-2 years or when it starts to show signs of low power.

Can I use a different type of battery?

No, it is important to use a CR2032 battery as it is specifically designed for this key fob.

What if the key fob doesn’t work after replacing the battery?

Ensure the battery is properly installed with the positive side facing down. If it still doesn’t work, the key fob may have other issues that need professional attention.

Conclusion

Replacing the battery in your Chevrolet Silverado key fob is a quick and easy process. With just a few simple tools and steps, you can ensure your key fob is functioning correctly. If you found this guide helpful, feel free to share it with others who might benefit from it. For more information on key fob replacements and other related topics, visit our website or check out our other tutorials.