Chevrolet Suburban Key Fob Battery Replacement (2007 – 2014)

Introduction

Replacing the battery in your Chevrolet Suburban key fob is a straightforward process that you can do at home. This guide will walk you through the steps to replace the battery in just a few minutes. No need to visit a dealership.

All you need is a flathead screwdriver and a CR2032 battery. If you don’t have the battery, you can easily find it online for a few bucks.

Tools and Materials

Before you start, make sure you have the following items:

• Flathead screwdriver
• CR2032 battery

You can purchase the CR2032 battery from Amazon. Here’s the link: Buy CR2032 Battery.

Step-by-Step Guide

Step 1: Locate the Indentation

On the bottom right of your key fob, next to the keyring attachment, you’ll see a small indentation along the seam. This is where you will insert your flathead screwdriver.

Step 2: Insert the Screwdriver

Insert your flathead screwdriver into the indentation. Wiggle it gently to get it in place. Once inserted, give it a twist. This will open up the key fob.

Step 3: Pull Apart the Key Fob

Once you’ve given it a twist, you can pull the key fob apart with your fingers. Now you have access to the battery.

Step 4: Remove the Circuit Board

If the circuit board comes out, don’t worry. It’s actually easier to remove the battery this way. Gently lift out the circuit board and set it aside for a moment.

Step 5: Remove the Old Battery

Slide out the old battery using your thumb. Dispose of it properly.

Step 6: Insert the New Battery

Make sure your new battery is a CR2032. When inserting it, ensure the positive side (marked with a plus sign) is facing up. Slide it all the way into place.

Step 7: Reassemble the Key Fob

Take the front part of your key fob with the rubber insert and drop the circuit board back in, with the battery facing up. Make sure it sits flat and nice. Then, place the back piece on top, align it properly, and squeeze it back together.

Final Checks

Once you have reassembled the key fob, check to make sure it is securely closed. Press the buttons to ensure they are working correctly. Your key fob should now be functioning with the new battery.

Conclusion

Replacing the battery in your Chevrolet Suburban key fob is quick and easy. It takes less than five minutes and saves you a trip to the dealership. If you found this guide helpful, feel free to let us know in the comments or by liking the video.

If you need help with other key fobs, visit our channel or our website: fobbattery.com.

Frequently Asked Questions (FAQ)

What type of battery do I need?

You need a CR2032 battery for the Chevrolet Suburban key fob.

Where can I buy the CR2032 battery?

You can purchase the CR2032 battery on Amazon.

Do I need any special tools?

You only need a flathead screwdriver to open the key fob.

How long does it take to replace the battery?

The entire process takes less than five minutes.

Can I damage the key fob?

If you follow the steps carefully, you should not damage the key fob.

What if the circuit board comes out?

It’s okay if the circuit board comes out. It makes it easier to remove and replace the battery.

How do I dispose of the old battery?

Dispose of the old battery according to your local regulations for battery disposal.

What if my key fob still doesn’t work?

Ensure the battery is inserted correctly with the positive side facing up. If it still doesn’t work, the key fob may have other issues.

Additional Tips

Always keep a spare CR2032 battery at home. This way, you won’t be caught off guard when the battery dies.

Regularly check your key fob’s battery status. If the range seems reduced or the buttons are less responsive, it might be time for a new battery.

More Resources

For more tutorials and guides on key fob maintenance, visit our website: fobbattery.com. We cover devices from almost every make and model.

Thank you for reading! If you have any questions or need further assistance, feel free to reach out in the comments section.