Chevrolet Tahoe Key Fob Battery Replacement (2015 – 2020)

Introduction

If your Chevrolet Tahoe key fob has stopped working, it might be time to replace the battery. This guide will walk you through the steps to replace the battery in your key fob for models ranging from 2015 to 2020. Don’t worry; the process is straightforward and requires minimal tools.

Tools and Materials Needed

Before starting, gather the necessary tools and materials to ensure a smooth process. You’ll need a regular flathead screwdriver and a CR2032 coin battery. If you don’t have a CR2032 battery, you can purchase one from Amazon.

Identifying Your Key Fob

Chevrolet Tahoe key fobs from 2015 to 2020 come in different versions, including six-button, five-button, and four-button models. Regardless of the number of buttons, the battery replacement process is the same for all versions.

Step-by-Step Battery Replacement

Step 1: Locate the Slot

Flip the key fob over and look for the slot near the keyring attachment. This slot is where you’ll insert the flathead screwdriver.

Step 2: Insert the Screwdriver

Insert the flathead screwdriver into the slot and push it to one side. Hold the key fob on its sides and twist the screwdriver to pop off the first tab. Repeat the process in the opposite direction to release the second tab.

Step 3: Remove the Back Cover

Once the tabs are released, lift the back cover off and set it aside. Be cautious as the battery might be tightly secured, especially if it’s your first time opening the key fob.

Step 4: Remove the Old Battery

Use the flathead screwdriver to pry the old battery out from the slot. Insert the screwdriver next to the tab and gently push it down to release the battery.

Step 5: Insert the New Battery

Grab a new CR2032 battery and ensure the positive side (marked with a plus sign) is facing up. Slide the battery under the larger tab before snapping it under the smaller tab.

Step 6: Reassemble the Key Fob

Place the back cover on the key fob, aligning the tabs with the slots. Snap it back into place, ensuring it is securely attached.

Common Issues and Solutions

While replacing the battery, you might encounter some issues. Here are common problems and their solutions:

• Difficulty opening the key fob: Apply gentle pressure.
• Battery not fitting: Ensure correct orientation.
• Loose cover: Check tabs alignment.

Additional Resources

If you need further assistance, check out the full guide on FobBattery. They provide detailed instructions and visual aids to help you through the process.

Frequently Asked Questions

What type of battery does the Chevrolet Tahoe key fob use?

The Chevrolet Tahoe key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

The battery typically lasts 1-2 years. Replace it when the key fob starts to malfunction.

Can I use a different type of battery?

It’s recommended to use a CR2032 battery for optimal performance.

Do I need to reprogram the key fob after changing the battery?

No, replacing the battery does not require reprogramming.

What should I do if the key fob still doesn’t work after replacing the battery?

Check the battery orientation and ensure the cover is securely attached. If the problem persists, consult a professional.

Conclusion

Replacing the battery in your Chevrolet Tahoe key fob is a simple task that you can do at home. With just a flathead screwdriver and a CR2032 battery, you can have your key fob working like new in minutes. For more guides and resources, visit FobBattery. If you need a battery, consider purchasing it from Amazon.