Introduction
Replacing the battery in your Chevrolet Tahoe key fob is a simple process that you can do in just a few minutes. This guide will walk you through the steps to replace the battery in both the three-button and four-button versions of the key fob used for Tahoe models from 2007 to 2014.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you start, make sure you have the following tools and materials:
- Flathead screwdriver
- CR2032 battery
If you don’t have these items on hand, you can easily purchase a CR2032 battery online. Here’s a link to buy the battery.
Step-by-Step Battery Replacement
Follow these steps to replace the battery in your Chevrolet Tahoe key fob:
Step 1: Locate the Slot
First, look at the bottom of your key fob, near where the key ring attaches. You will see a small slot along the seam between the two halves of the device.
Step 2: Insert the Screwdriver
Insert your flathead screwdriver into this slot. Push it all the way in until it is firmly in place.
Step 3: Open the Key Fob
Gently turn the screwdriver. As soon as you feel the key fob start to open, stop turning. Use your fingers to pull the key fob apart carefully to avoid damaging the plastic with the screwdriver.
Step 4: Remove the Circuit Board
Once the key fob is open, set the back cover aside. Carefully lift out the circuit board. If the rubber component comes out with it, don’t worry. Just align it and push it back down.
Step 5: Remove the Old Battery
Slide the old CR2032 battery out of its slot. Dispose of it properly.
Step 6: Insert the New Battery
Take your new CR2032 battery. Ensure the positive side (marked with a plus sign) is facing up. Push it into the metal component until it is securely in place.
Step 7: Reassemble the Key Fob
Place the circuit board back into the front half of the key fob, with the battery facing up. Align the back cover and squeeze the two halves together until they snap into place.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And that’s it! You now have a new battery in your key fob, and you’re good to go. This simple process can save you time and money compared to visiting a dealership.
Frequently Asked Questions
What type of battery does the Chevrolet Tahoe key fob use?
The Chevrolet Tahoe key fob uses a CR2032 coin battery.
Can I use a different type of battery?
No, it’s recommended to use a CR2032 battery for optimal performance.
How often should I replace the key fob battery?
Typically, the battery should be replaced every 1-2 years, depending on usage.
What if the key fob doesn’t work after replacing the battery?
Ensure the battery is inserted correctly with the positive side facing up. If it still doesn’t work, try a different CR2032 battery.
Can I replace the battery myself?
Yes, replacing the battery is a simple process that you can do yourself with a flathead screwdriver.
Is it the same process for both three-button and four-button key fobs?
Yes, the process is the same for both the three-button and four-button versions of the key fob.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online or at most electronic and hardware stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Additional Resources
If you need more help or have other key fobs to service, check out FobBattery.com for more guides and resources. Subscribe to our channel for quick, easy tutorials on key fob battery replacement for almost every make and model.
We hope this guide was helpful. Feel free to leave a comment or like the video if you found it useful. Happy driving!