Chevrolet Trax Key Fob Battery Replacement (2014 – 2018)

Introduction

Replacing the battery in your Chevrolet Trax key fob is a straightforward task that anyone can do at home. You don’t need to visit a dealership, and you only need a few simple tools. This guide will walk you through the process, ensuring your key fob is back in working order in no time.

Tools and Materials Needed

Before you start, gather the necessary tools and materials. Here’s what you’ll need:

• CR2032 battery
• Coin (optional)

If you don’t have a CR2032 battery or are unsure where to get one, check the link in the description. This link will take you to an Amazon listing where you can purchase these batteries at a great price.

Identify Your Key Fob Model

The Chevrolet Trax key fob comes in two versions: a three-button and a four-button model. However, the battery replacement process is identical for both versions. Follow along to replace the battery in either model.

Step-by-Step Battery Replacement

Step 1: Flip Out the Key

First, flip out the key. This will reveal the area where the key was housed.

Step 2: Remove the Back Section of Plastic

Next, locate the lip on the back section of plastic. Push up on this lip to lift the plastic section out. This step doesn’t require much force.

Using a Coin

If pushing the lip is challenging, use a coin like a quarter or a silver dollar. Insert the coin into the key area and gently twist. This will help pop the plastic section off, giving you access to the battery.

Step 3: Remove the Old Battery

Once the back section is off, apply a little pressure with your finger next to the plastic tab holding the battery. The battery should pop out easily.

Step 4: Insert the New Battery

Dispose of the old battery and grab your new CR2032 battery. When inserting the new battery, ensure the positive side (marked with a plus sign) is facing up. Slide it under the tab and click it into place so it sits flat.

Step 5: Snap the Back Section Back On

With the new battery in place, snap the back section of plastic back on. Ensure it is secure. Finally, put the key back in its original position.

Conclusion

That’s it! You’ve successfully replaced the battery in your Chevrolet Trax key fob. This simple process can save you time and money by avoiding a trip to the dealership.

Additional Resources

If you found this guide helpful, feel free to let us know in the comments or by liking this post. For more tutorials on key fob battery replacements for various makes and models, visit our website at FobBattery.com.

FAQs

What type of battery does the Chevrolet Trax key fob use?

The Chevrolet Trax key fob uses a CR2032 battery.

Is the battery replacement process the same for all Chevrolet Trax key fobs?

Yes, the process is the same for both the three-button and four-button versions of the key fob.

Do I need any special tools to replace the battery?

No special tools are needed. A coin can be helpful but is optional.

How long does the battery replacement take?

The entire process should take less than five minutes.

What should I do with the old battery?

Dispose of the old battery properly, following your local regulations for battery disposal.

Can I replace the battery myself, or do I need to visit a dealership?

You can easily replace the battery yourself. There’s no need to visit a dealership.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from various retailers, including online stores like Amazon.

What if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, double-check that the battery is installed correctly with the positive side facing up. If it still doesn’t work, you may need to consult a professional for further assistance.