Chevrolet Trax Key Fob Battery Replacement (2019 – 2021)

Introduction

Replacing the battery in your Chevrolet Trax key fob is a simple process that can save you both time and money. You don’t need to visit a dealership; instead, you can do it yourself with a few basic tools. This guide will walk you through the steps needed to replace the battery in your key fob, whether you have the three-button or four-button version.

Tools and Materials Needed

Before you begin, make sure you have the following items:

• Flathead screwdriver
• CR2032 battery

If you don’t have a CR2032 battery, you can purchase one from Amazon or any local store. The link provided in the video description offers a convenient option to buy it online.

Step-by-Step Guide

Step 1: Open the Key Fob

First, flip your key fob over to the back side. Look for the area where the key ring attaches. You’ll see a small opening in this area.

Take your flathead screwdriver and insert it into this opening. Gently hold the sides of the key fob to make the process easier. Pry the back piece of plastic until you hear a click. This indicates that the right side has started to open.

Be careful not to yank the back piece off at this point. Doing so could create a crack on the left side, which is still attached. Instead, insert the screwdriver under the opening and gently pry up until the bottom part starts to come undone. You can then remove the back piece without damaging your key fob.

Step 2: Remove the Old Battery

Now that you have the back piece off, you can see the battery compartment. There is an arrow indicating where to insert the screwdriver to remove the battery.

Insert the flathead screwdriver into the indicated area. Wiggle it down while pushing the battery down. This can be a bit tricky and may require some force. Different sizes of flathead screwdrivers can be used, but a longer one tends to work better.

Once the screwdriver slips under the battery, you can pry it out. Dispose of the old battery properly.

Step 3: Insert the New Battery

Take your new CR2032 battery and ensure the positive side, marked with a plus sign, is facing up. Slide it under the plastic tab and click it down on the other side so it sits flat in the compartment.

Step 4: Reassemble the Key Fob

With the new battery in place, it’s time to reassemble your key fob. Align the back piece of plastic with the top of the device first. Once it’s in place, snap it down to secure it.

Check to ensure everything is properly aligned and secure. Your key fob should now be functioning with the new battery.

Tips and Warnings

• Take your time to avoid damaging the key fob.
• Use the correct size of flathead screwdriver.
• Dispose of the old battery responsibly.

Benefits of DIY Battery Replacement

By replacing the battery yourself, you can save a significant amount of money. Dealerships often charge a premium for this simple service. Additionally, you gain the satisfaction of completing a small but important task on your own.

FAQs

Can I use any flathead screwdriver?

While any flathead screwdriver can work, using one that is long enough and appropriately sized will make the process easier.

What if I accidentally damage my key fob?

If you follow the instructions carefully, you should be able to avoid damage. However, if damage occurs, you may need to consult a professional for repair or replacement.

Where can I buy a CR2032 battery?

CR2032 batteries are available at most local stores and online.

How often should I replace the key fob battery?

Typically, key fob batteries last between 1-2 years. If your key fob starts to show signs of low battery, such as reduced range or intermittent functionality, it’s time to replace the battery.

Conclusion

Changing the battery in your Chevrolet Trax key fob is a straightforward process that can be done in a few minutes. With just a flathead screwdriver and a CR2032 battery, you can save money and ensure your key fob continues to function properly. Follow the steps outlined in this guide to complete the task with ease.

If you found this guide helpful, feel free to leave a comment or like the video. For more tutorials on key fob battery replacements for various makes and models, visit our website or subscribe to our channel. We’ve got you covered with detailed guides and resources.