Introduction
Replacing the battery in your Chrysler Town & Country key fob is a straightforward process. This guide covers models from 1999 to 2003. You’ll need two CR2016 coin batteries, which you can easily find online. Follow along to learn how to do it yourself.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Materials Needed
- Flathead screwdriver
- Two CR2016 batteries
Step-by-Step Instructions
Step 1: Locate the Indentation
First, find the small slot on the key fob. This indentation is where you will insert your flathead screwdriver.
Step 2: Insert the Screwdriver
Insert the screwdriver into the slot. Turn it like a key until you create a small separation between the two halves of the key fob.
Step 3: Fully Separate the Key Fob
Once you have a small opening, continue twisting the screwdriver until the two parts separate. You can then pull them apart with your fingers easily.
Step 4: Remove the First Battery
With the key fob open, you’ll see two batteries stacked. Use your fingernail or the screwdriver to carefully lift the first battery out.
Step 5: Remove the Second Battery
The second battery sits a bit deeper. Push down on one side to lift the other side up. Carefully use your tool or fingernail to lift it out.
Step 6: Insert the New Batteries
Take a new CR2016 battery and ensure the positive side faces up. Place it into the slot. Repeat this for the second battery, also ensuring the positive side is up.
Step 7: Reassemble the Key Fob
Click the two halves of the key fob back together. Ensure they are securely connected.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Conclusion
And that’s it! You’ve successfully replaced the batteries in your Chrysler Town & Country key fob. If you found this guide helpful, feel free to leave a comment or like. For more information on key fob battery replacements, visit our website or check out our other videos.
FAQ
What type of battery does the key fob use?
The key fob uses two CR2016 coin batteries.
Where can I buy the batteries?
You can purchase CR2016 batteries online, such as on Amazon.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Is it difficult to replace the batteries?
No, replacing the batteries is a simple process that you can do at home.
Do I need any special tools?
You only need a flathead screwdriver.
Can I use other battery types?
No, you should only use CR2016 batteries for this key fob.
What should I do if the key fob doesn’t work after replacing the batteries?
Ensure the batteries are inserted correctly with the positive side facing up. If it still doesn’t work, the key fob may have other issues.
How often do I need to replace the batteries?
Battery life varies, but you should replace them when the key fob stops working properly.
Can I get professional help?
Yes, you can visit a professional if you’re uncomfortable doing it yourself.