Dodge Caliber Key Fob Battery Replacement (2007 – 2012)

Introduction

Replacing the battery in a Dodge Caliber key fob is quite simple. This key fob model, used from 2007 to 2012, contains a CR2032 battery. You can easily change the battery at home without needing professional help.

In this guide, I will walk you through the step-by-step process of replacing the battery in your Dodge Caliber key fob. Follow these instructions carefully, and you’ll have a functioning key fob in no time.

Tools and Materials Needed

• CR2032 battery
• Flathead screwdriver

The CR2032 battery is readily available and inexpensive. You can purchase it online or at a local store. If you prefer to buy online, I have provided a link in the video description for your convenience.

Step-by-Step Replacement Guide

Step 1: Locate the Indentation

First, examine your key fob and find the small indentation at the bottom left corner. This slot is designed to help you open the key fob.

Step 2: Insert the Screwdriver

Next, insert a flathead screwdriver into the indentation. Gently twist the screwdriver to start prying the key fob open. You will notice that the device begins to separate.

Step 3: Open the Key Fob

Continue to work your way around the key fob, twisting the screwdriver gently until you can easily pull the two halves apart with your fingers.

Step 4: Remove the Rubber Part

Once the key fob is open, you will see a rubber component inside. Remove this rubber part and set it aside. This will give you access to the battery.

Step 5: Remove the Old Battery

Using the flathead screwdriver, gently lift the old CR2032 battery out of its compartment. Be careful not to damage the battery holder.

Step 6: Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing down. Position the battery correctly, then press it into place until it clicks.

Step 7: Reassemble the Key Fob

Carefully reposition the rubber part back into the key fob. Align the two halves of the key fob and press them together until they click securely.

Final Checks

Once you have reassembled the key fob, test it to ensure it is working correctly. If everything is in order, you should have a fully functional key fob with a new battery.

Conclusion

Replacing the battery in your Dodge Caliber key fob is a straightforward process that you can do at home. By following these steps, you can save time and money by avoiding a trip to the dealership or a locksmith.

If you found this guide helpful, feel free to give us a like or leave a comment. For more information on changing the batteries of any of your key fobs, check out the rest of the videos on our YouTube channel or visit our website.

FAQ

What type of battery does the Dodge Caliber key fob use?

The Dodge Caliber key fob uses a CR2032 battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online or at most local stores.

Do I need professional help to replace the battery?

No, you can easily replace the battery at home by following the steps outlined in this guide.

How often should I replace the key fob battery?

The battery life can vary, but it’s a good idea to replace it every 1-2 years or when you notice a decrease in the key fob’s range or responsiveness.

Can I use a different type of battery?

No, it’s important to use a CR2032 battery to ensure compatibility and proper function of the key fob.

What should I do if the key fob doesn’t work after replacing the battery?

Double-check that the battery is installed correctly with the positive side facing down. If it still doesn’t work, the key fob itself may be damaged and require professional inspection.

Is there a risk of damaging the key fob?

As long as you follow the instructions carefully and use gentle force, the risk of damaging the key fob is minimal.

Can I recycle the old battery?

Yes, you should recycle the old CR2032 battery properly. Many stores and recycling centers accept used batteries.