Dodge Charger Key Fob Battery Replacement (2008 – 2010)

Introduction

Replacing the battery in your Dodge Charger key fob is a simple task that you can easily do at home. The key fob for the Dodge Charger models from 2008 to 2010 uses a CR2032 coin battery, which is readily available online or at most retail stores. In this guide, I will walk you through the steps to replace the battery in your key fob.

Gather Your Tools

Before you begin, make sure you have the necessary tools and materials. You will need a new CR2032 coin battery and a flathead screwdriver. These batteries are inexpensive and can be purchased online or at your local store. I have included a link to purchase them online in the video description.

• CR2032 coin battery
• Flathead screwdriver

Locate the Keyhole

The first step in replacing the battery is to locate the keyhole on your key fob. You will notice an indentation and a seam near the keyhole. This is where you will insert the flathead screwdriver to open the key fob.

Open the Key Fob

Insert the flathead screwdriver into the indentation near the keyhole. Apply a little bit of pressure to slide the screwdriver into the seam. Once the screwdriver is in, turn it like a key to start opening the key fob. You should hear a click as the two parts begin to separate.

Continue turning the screwdriver until the two parts of the key fob click apart completely. Once open, set aside the top part of the key fob. Be careful as you will now see the rubber and circuit board inside.

Remove the Old Battery

Carefully take out the rubber and circuit board to access the battery. Using the flathead screwdriver, gently lift the old CR2032 battery out of its compartment. It should come out with very little effort.

Insert the New Battery

Take your new CR2032 coin battery and ensure the positive side is facing down. Slide the battery towards the metal component in the compartment, making sure it is securely in place. Click the other side down to secure the battery fully.

Reassemble the Key Fob

Once the new battery is in place, carefully line up the rubber and circuit board and place them back into the key fob. Take the top part of the key fob and click it back together with the bottom part. Ensure everything is secure and not loose.

Test the Key Fob

After reassembling the key fob, test it to make sure it is working correctly. Your key fob should now be functioning with the new battery. If you encounter any issues, double-check that the battery is properly installed and the key fob is securely closed.

Conclusion

Changing the battery in your Dodge Charger key fob is a straightforward process that you can complete in just a few minutes. By following these steps, you can save time and money by avoiding a trip to the dealership. For more information on changing batteries in key fobs for other makes and models, visit our website or check out our other videos on YouTube.

FAQ

What type of battery does the Dodge Charger key fob use?

The Dodge Charger key fob for models 2008 to 2010 uses a CR2032 coin battery.

How often do I need to replace the key fob battery?

The battery life of a key fob varies depending on usage. Generally, a CR2032 battery can last between 1 to 2 years. If your key fob starts to lose range or stops working, it may be time to replace the battery.

Can I use a different type of battery for my key fob?

No, it is essential to use the correct type of battery specified for your key fob. Using a different battery type can cause damage to the key fob or result in it not working correctly.

Do I need to reprogram my key fob after changing the battery?

No, you do not need to reprogram your key fob after changing the battery. The key fob should work as usual once the new battery is installed.

What should I do if my key fob still doesn’t work after changing the battery?

If your key fob does not work after changing the battery, double-check that the battery is installed correctly and the key fob is securely closed. If it still doesn’t work, there may be an issue with the key fob itself, and you may need to contact your dealership for further assistance.

Where can I purchase a CR2032 battery?

CR2032 batteries are available online and at most retail stores. You can find them on websites like Amazon or at local electronic stores.

Thank you for reading this guide on replacing the battery in your Dodge Charger key fob. If you found this information helpful, please leave a comment or like. For more guides and tips, visit our website or check out our YouTube channel.