Introduction
Welcome! Today, I’ll guide you through the straightforward process of replacing the battery in a Dodge Dakota key fob. This method applies to models from 2005 to 2011. By following these steps, you can save time and money by avoiding a trip to the dealership. Let’s dive in!
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials
Before we start, let’s gather the necessary tools and materials. You will need:
- CR2032 coin battery
- Flathead screwdriver
You can easily find these items online. I recommend purchasing the battery from Amazon; it’s affordable and convenient.
Step-by-Step Guide
Locate the Slot
First, locate the small slot on the bottom left part of the key fob. This slot is between the two halves of the key fob, along the seam.
Insert the Screwdriver
Next, insert the flathead screwdriver into the slot. Hold the key fob firmly and turn the screwdriver like a key. Gently twist until you feel the two halves begin to separate.
Separate the Halves
Once you feel the separation, you can pull the halves apart with your fingers. If they still feel stuck, continue working the screwdriver down the seam, twisting gently until the halves come loose.
Remove the Rubber Part
After separating the halves, carefully remove the rubber part inside. Set it aside as you will need it later.
Pry Out the Old Battery
Use the flathead screwdriver to pry out the old battery from under the edge. The battery should pop out easily.
Insert the New Battery
Take the new CR2032 battery and ensure the positive side, with the text and battery information, is facing down. Click it into place.
Reassemble the Key Fob
Now, position the rubber part back in its original place. Align the face of the key fob on top and click everything back together.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Final Thoughts
And that’s it! You’ve successfully replaced the battery in your Dodge Dakota key fob. This simple process can be done at home, saving you the hassle and cost of visiting a professional.
If you found this guide helpful, please leave a like or a comment. For more information on replacing key fob batteries for various makes and models, check out our other videos or visit us at FobBattery.com.
FAQ
What battery type does the Dodge Dakota key fob use?
The Dodge Dakota key fob uses a CR2032 coin battery.
Do I need any special tools to replace the battery?
No, you only need a flathead screwdriver.
How long does the replacement process take?
The entire process takes just a few minutes.
Is it safe to replace the battery myself?
Yes, it’s a simple and safe process that you can do at home.
What if my key fob doesn’t work after replacing the battery?
Ensure the battery is correctly installed with the positive side facing down. If it still doesn’t work, the key fob may have other issues.
Where can I buy a CR2032 battery?
You can purchase CR2032 batteries online, such as on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Thank you for reading! For more DIY guides and tips, stay tuned to our blog.