Introduction to Key Fob Battery Replacement
Replacing the battery in your Dodge Dart key fob is a simple task that you can do at home. This guide covers key fobs used between 2014 and 2016. All you need is a CR2032 battery and a few minutes of your time.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Necessary Tools and Supplies
Before you begin, gather the required tools and supplies. You will need a new CR2032 battery and a flathead screwdriver. These batteries are readily available online and in stores.
- CR2032 battery
- Flathead screwdriver
You can find CR2032 batteries on Amazon for a few dollars. Here’s a link to purchase one: Buy CR2032 Battery.
Step-by-Step Battery Replacement
Follow these steps to replace the battery in your Dodge Dart key fob:
Step 1: Remove the Internal Key
First, turn the key fob over. Hold down the small latch and remove the internal key. This exposes the keyhole and the slot for opening the fob.
Step 2: Open the Key Fob
Insert the flathead screwdriver into the slot opposite the keyhole. Twist gently until you create an opening between the two halves of the key fob. Continue twisting along the seam until the fob comes apart easily.
Step 3: Remove the Old Battery
Set the two halves of the key fob aside. You will see the old battery inside. Use your fingernail or the flathead screwdriver to gently lift and pry the old battery out.
Step 4: Insert the New Battery
Take the new CR2032 battery and ensure the positive side with the text faces down. Push it toward the metal component first, then click the other side into place. The battery should fit snugly.
Step 5: Reassemble the Key Fob
Align the two halves of the key fob and press them together. Apply some pressure to ensure they fit tightly with no gaps. Finally, reinsert the internal key.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Testing and Final Checks
After replacing the battery, test the key fob to ensure it works correctly. Press the buttons to check the response. If everything functions as expected, you have successfully replaced the battery.
Additional Tips and Troubleshooting
Here are a few additional tips to keep in mind:
- Handle the battery carefully
- Ensure the battery is properly aligned
- Test the key fob before reassembling
If the key fob does not work after replacing the battery, double-check the battery orientation. Ensure it is seated correctly. If issues persist, consider consulting a professional.
FAQs
What type of battery does the Dodge Dart key fob use?
The Dodge Dart key fob uses a CR2032 coin battery.
How often should I replace the key fob battery?
Typically, you should replace the key fob battery every 1-2 years or when it starts showing signs of low power.
Can I use a different type of battery?
No, it is recommended to use the specified CR2032 battery to ensure compatibility and proper functionality.
What should I do if the key fob still doesn’t work after replacing the battery?
Double-check the battery orientation and ensure it is seated correctly. If issues persist, consult a professional or visit a dealership.
Where can I buy a CR2032 battery?
You can purchase CR2032 batteries online on platforms like Amazon or at local electronics stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Dodge Dart key fob is a straightforward process. With a new CR2032 battery and a few simple steps, you can ensure your key fob continues to function properly. Don’t forget to test the key fob after replacing the battery to confirm everything is working as expected.
Additional Resources
For more information on key fob battery replacements for various makes and models, visit our website or check out additional videos on our YouTube channel.
Thank you for reading, and feel free to leave comments or feedback.