Dodge Dart Key Fob Battery Replacement Guide (2013 – 2016)

Introduction

Replacing the battery in your Dodge Dart key fob is a straightforward process that you can do at home. This guide will walk you through the steps to replace the battery in key fobs used between 2013 and 2016. The only tool you’ll need is a flathead screwdriver, and the replacement battery is a CR2032 coin battery.

Gather Your Materials

Before you start, make sure you have the following materials:

• Flathead screwdriver
• CR2032 coin battery

You can find CR2032 batteries online, and they are relatively inexpensive. I’ve included a link to purchase these batteries on Amazon for your convenience.

Opening the Key Fob

First, locate the indentation near the key ring on your key fob. This is where you will insert your flathead screwdriver. The seam between the two halves of the key fob is where you will apply pressure to open it.

Here are the steps to open the key fob:

1. Insert the flathead screwdriver into the indentation.
2. Gently press and wiggle the screwdriver along the seam.
3. Once the screwdriver is in, give it a little twist to crack open the key fob.
4. Twist down the side until the key fob comes apart.

Removing the Old Battery

After opening the key fob, you’ll see a rubber component with buttons and the circuit board underneath. Carefully remove the rubber component to reveal the battery.

To remove the old battery:

1. Lift the battery with your finger.
2. If needed, use the flathead screwdriver to gently lift the battery.

The battery should pop out easily. Dispose of the old battery properly.

Inserting the New Battery

Now, take your new CR2032 battery and make sure the positive side is facing down. Follow these steps to insert the new battery:

1. Push the battery up into the metal component first.
2. Click the other side of the battery into place.

Ensure the battery is securely in place before proceeding.

Reassembling the Key Fob

With the new battery installed, it’s time to put the key fob back together. Follow these steps:

1. Align the rubber component with the circuit board and place it back in the key fob.
2. Place the face of the key fob back on top.
3. Click the two halves of the key fob back together until they fit snugly.

Make sure everything is aligned correctly to avoid any issues with the buttons or the battery.

Testing the Key Fob

Once you have reassembled the key fob, it’s time to test it. Press the buttons to ensure they are working correctly and that the new battery is functioning as expected. If everything is working, you’ve successfully replaced the battery in your Dodge Dart key fob.

Conclusion

Replacing the battery in your Dodge Dart key fob is a simple task that you can do yourself. With just a flathead screwdriver and a new CR2032 battery, you can have your key fob working like new in no time. If you found this guide helpful, feel free to leave a comment or like. For more information on changing batteries for other key fobs, check out our other guides and videos.

FAQ

What type of battery does the Dodge Dart key fob use?

The Dodge Dart key fob uses a CR2032 coin battery.

Do I need any special tools?

No, you only need a flathead screwdriver to open the key fob and replace the battery.

Is it safe to replace the battery myself?

Yes, replacing the battery yourself is safe and straightforward. Just follow the steps outlined in this guide.

How do I know if my key fob battery needs replacing?

If your key fob is not working correctly or has a reduced range, it’s likely time to replace the battery.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center or following your local regulations for battery disposal.

Can I use a different type of battery?

It’s best to use a CR2032 battery as recommended. Using a different type of battery may not fit or function correctly.

Will replacing the battery affect the key fob’s programming?

No, replacing the battery will not affect the key fob’s programming. It will continue to work with your vehicle as before.

What if my key fob still doesn’t work after replacing the battery?

If your key fob still doesn’t work, there may be another issue. Consider consulting your vehicle’s manual or a professional for further assistance.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online, and they are usually inexpensive. I’ve included a link to buy them on Amazon.