Dodge Durango Key Fob Battery Replacement (1999 – 2003)

Introduction

Replacing the battery in a Dodge Durango key fob from 1999 to 2003 is a simple process you can do at home. This guide will walk you through each step. You’ll need two CR2016 coin batteries and a flathead screwdriver. Let’s get started.

Sale
Energizer 2016 Batteries, 3 Volt Battery Lithium Coin, 2 Count
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power

Gathering Your Tools

Before you begin, make sure you have the necessary tools. You’ll need:

  • Flathead screwdriver
  • Two CR2016 batteries

You can purchase these batteries online. They are affordable and can be found on Amazon.

Opening the Key Fob

Locate the small slot on the bottom right side of the key fob. This is where you’ll insert the screwdriver to open the fob.

Follow these steps:

  1. Insert the flathead screwdriver into the slot.
  2. Gently twist the screwdriver to create a separation between the two halves of the key fob.
  3. Continue twisting until you can pull the fob apart with your fingers.

Removing the Old Batteries

Inside the key fob, you’ll find two CR2016 batteries stacked on top of each other. Carefully remove them:

Here’s how:

  1. Use your fingernail or the screwdriver to lift the top battery out.
  2. For the bottom battery, push down on one side to lift it up, then pull it out.

Inserting the New Batteries

With the old batteries removed, it’s time to insert the new ones. Ensure the positive side of each battery faces up:

  1. Place the first battery in the slot, positive side up.
  2. Stack the second battery on top of the first, also positive side up.

Reassembling the Key Fob

After inserting the new batteries, reassemble the key fob:

  1. Align the two halves of the key fob.
  2. Press them together until they click into place.

Testing the Key Fob

Once reassembled, test the key fob to ensure it’s working correctly. If it doesn’t work, double-check the battery orientation and make sure the fob is securely closed.

Sale
Energizer 2016 Batteries, 3 Volt Battery Lithium Coin, 2 Count
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power

Conclusion

Replacing the battery in your Dodge Durango key fob is quick and easy. By following these steps, you can save time and avoid a trip to the dealership.

Frequently Asked Questions

What type of battery does the Dodge Durango key fob use?

The key fob uses CR2016 coin batteries. You’ll need two for the replacement.

Is it necessary to use a flathead screwdriver?

Yes, a flathead screwdriver is ideal for opening the key fob. It fits into the slot and allows you to gently twist the fob open.

How do I know if the batteries are installed correctly?

Ensure the positive side of each battery faces up. If the key fob doesn’t work after reassembly, double-check the battery orientation.

Can I use a different type of battery?

No, it’s best to use CR2016 batteries. Other types may not fit or function properly in the key fob.

What if my key fob still doesn’t work after replacing the batteries?

If the key fob doesn’t work after replacing the batteries, check the battery orientation and ensure the fob is securely closed. If it still doesn’t work, there may be an issue with the key fob itself.

How often should I replace the key fob batteries?

Typically, key fob batteries last 1-2 years. If your key fob starts to work intermittently or stops working, it’s time to replace the batteries.

Is it safe to replace the key fob batteries myself?

Yes, replacing the key fob batteries yourself is safe and straightforward. Just follow the steps outlined in this guide.

Where can I buy CR2016 batteries?

You can purchase CR2016 batteries on Amazon or at most electronics stores.

Sale
Energizer 2016 Batteries, 3 Volt Battery Lithium Coin, 2 Count
  • Used in heart rate monitors, keyless entry, glucose monitors, toys & games
  • Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
  • Reliable, dependable power

Additional Resources

For more information on key fob battery replacements for various makes and models, visit our website or check out our other videos on YouTube.

Final Thoughts

Replacing the battery in your Dodge Durango key fob is a simple task that can be done in minutes. With the right tools and a bit of patience, you can save time and money. Happy driving!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.