Dodge Durango Key Fob Battery Replacement Guide (2014 – 2021)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Dodge Durango key fob is a straightforward process that you can do at home. This guide will walk you through each step to ensure your key fob is back in working order. All you need is a CR2032 battery and a flathead screwdriver.

Gathering the Necessary Tools

Before you begin, make sure you have the following items:

• CR2032 battery
• Flathead screwdriver

You can easily purchase a pack of CR2032 batteries online. I recommend buying them on Amazon for convenience and reliability.

Removing the Internal Key

The first step is to turn your key fob over and locate the small button or lever. Hold this lever down and remove the internal key. This will reveal a hole where the key was housed.

Opening the Key Fob

Next, you’ll see a small slot above the hole where the internal key was. Take your flathead screwdriver and insert it into the slot. Gently twist the screwdriver as if you were turning a key. This action will start to pry the key fob open. Continue this motion, working your way down the seam until the key fob is fully open.

Accessing and Removing the Old Battery

Now that the key fob is open, you will see the old CR2032 battery. You can use your fingernail to lift it out. If it’s stubborn, gently use your flathead screwdriver to pry it up. The battery should pop out easily.

Inserting the New Battery

Take your new CR2032 battery and make sure the positive side (usually marked with a “+”) is facing down. Click it into place and ensure it sits securely in its compartment. This step is crucial for the proper functioning of your key fob.

Reassembling the Key Fob

Once the new battery is in place, align the two halves of the key fob and press them together. Apply pressure until there are no gaps along the seam. This ensures that the key fob is securely closed.

Reinserting the Internal Key

Finally, reinsert the internal key back into its slot. Make sure it clicks into place. Your key fob should now be fully functional with its new battery.

Conclusion

Replacing the battery in your Dodge Durango key fob is a simple task that can save you time and money. By following these steps, you can ensure that your key fob remains reliable and functional. For more information on key fob battery replacements for other makes and models, feel free to visit fobbattery.com.

Frequently Asked Questions (FAQ)

What type of battery do I need for my Dodge Durango key fob?

You will need a CR2032 battery. These are commonly available and can be purchased online.

Do I need any special tools to replace the battery?

No special tools are required. You only need a flathead screwdriver to open the key fob and a new CR2032 battery.

How long does the battery replacement process take?

The entire process takes about 5-10 minutes. It’s quick and easy.

Can I use any brand of CR2032 battery?

Yes, you can use any brand as long as it is a CR2032 battery. However, for reliability, I recommend purchasing from a reputable source like Amazon.

What should I do if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, double-check to ensure the battery is inserted correctly. If it still doesn’t work, there may be an issue with the key fob itself, and you may need to consult a professional.

Is it safe to replace the battery myself?

Yes, it is safe to replace the battery yourself. Just follow the steps carefully and handle the small parts with care.

How often should I replace the key fob battery?

The battery typically lasts 1-2 years, depending on usage. If your key fob starts to show signs of weakening (e.g., reduced range), it’s time to replace the battery.

Where can I find more information on key fob battery replacements?

For more detailed guides on key fob battery replacements for various makes and models, visit fobbattery.com.