Introduction to Key Fob Battery Replacement
Replacing the battery in your Dodge Intrepid key fob is a straightforward process that can save you both time and money. You don’t need to visit a dealership or hire a professional. With just a few tools and a little guidance, you can do it yourself at home.
In this guide, I’ll walk you through the entire process. We’ll cover everything from the tools you’ll need to the step-by-step instructions for replacing the battery. Let’s get started.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Tools and Materials Needed
Before we dive into the process, let’s gather the necessary tools and materials. You only need a couple of items to get the job done.
- Flathead Screwdriver
- Two CR2016 Batteries
If you don’t have these batteries on hand, you can easily purchase them online. I’ve included a link where you can buy them affordably on Amazon.
Steps to Replace the Key Fob Battery
The process of replacing the battery in your Dodge Intrepid key fob is simple. Follow these steps carefully, and you’ll have a functioning key fob in no time.
Step 1: Locate the Indentation
First, find the small slot or indentation along the seam of the key fob. This is where you will insert the flathead screwdriver.
Step 2: Open the Key Fob
Insert the flathead screwdriver into the slot and gently twist it. You will feel a click as the two halves of the key fob start to separate. Continue twisting along the seam until the key fob comes apart easily in your hands.
Step 3: Remove the Old Batteries
Inside, you will find two old CR2016 batteries stacked on top of each other. Use the flathead screwdriver or your fingernail to lift the first battery out. For the second battery, push on one side to make it easier to lift out.
Step 4: Insert the New Batteries
Take your new CR2016 batteries and place the first one in the slot with the positive side facing up. Click it into place. Then, place the second battery on top of the first one, again with the positive side facing up.
Step 5: Reassemble the Key Fob
Once the new batteries are in place, carefully align the two halves of the key fob and press them together until they click. Ensure that the key fob is securely closed.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Testing Your Key Fob
After replacing the batteries and reassembling the key fob, it’s time to test it. Press the buttons on the key fob to ensure that it’s functioning correctly. If the key fob doesn’t work, double-check that the batteries are correctly installed with the positive side facing up.
Frequently Asked Questions
Here are some common questions and answers about replacing the battery in a Dodge Intrepid key fob.
What type of battery does the Dodge Intrepid key fob use?
The Dodge Intrepid key fob uses two CR2016 coin batteries.
How often should I replace the key fob battery?
Typically, a key fob battery lasts about 1-2 years. If you notice reduced range or intermittent operation, it’s time to replace the battery.
Can I use a different type of battery?
No, it’s important to use the specified CR2016 batteries. Using a different type can damage the key fob.
Where can I buy CR2016 batteries?
You can purchase CR2016 batteries at most electronics stores or online. I’ve provided a link to buy them on Amazon for convenience.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Conclusion
Replacing the battery in your Dodge Intrepid key fob is a simple, cost-effective process. With just a flathead screwdriver and two CR2016 batteries, you can have your key fob working like new in minutes.
If you found this guide helpful, feel free to leave a comment or a like. For more information on key fob batteries for other makes and models, check out our other guides on YouTube or visit us at fogbattery.com.