Easy Honda Key Battery Replacement: Pilot 2005-2015 Edition

Introduction

Replacing the battery in your Honda Pilot key fob can seem daunting, but it’s actually a simple process. This guide is specifically for the Honda Pilot models from 2005 to 2015. The key fob in question features rounded buttons. Follow these steps to get your key fob working like new.

Tools and Materials Needed

Before you start, ensure you have the following tools and materials:

• CR1616 Coin Battery
• Precision Screwdriver Set

You can purchase the CR1616 coin battery and the precision screwdriver set from Amazon. Having the right tools will make the process much smoother.

Step-by-Step Guide

Step 1: Remove the Small Philips Screw

First, flip the key fob over to reveal a small Philips screw at the base. Using a precision screwdriver, carefully remove this tiny screw. It might be challenging the first time, but with patience, it will come out. Once the screw is removed, set it aside safely.

Step 2: Separate the Key Fob’s Base

Locate the notch in the lower left of the key fob. Insert the Philips screwdriver into this notch and twist it gently. This action will create leverage, allowing you to separate the base of the key fob. Pull the base towards you to open it completely.

Step 3: Remove the Internals

With the base separated, you can now pull out the internal components of the key fob. Set the outer case aside for now, as you’ll need it again later.

Step 4: Open the Internal Housing

Look at the internal components and locate another notch, this time in the upper right corner. Use the small Philips screwdriver to twist and pop open the internal housing. This will give you access to the battery compartment.

Step 5: Replace the Battery

Gently pop out the old CR1616 coin battery using the screwdriver. Make sure the new battery’s positive side, marked with all the lettering, is facing away from you. Simply push the new battery into place.

Step 6: Reassemble the Internal Components

Once the new battery is in place, snap the internal housing back together. Ensure it is securely closed before moving on to reassemble the outer case.

Step 7: Reassemble the Outer Case

Take the outer case and align the lip at the top first. This makes it easier to fit the base back together. Once aligned, snap the base into place. Finally, reinsert the small Philips screw to secure the key fob.

Testing the Key Fob

Before you consider the job done, test the key fob to ensure it’s working correctly. If your key fob has a light, check to see if it illuminates when you press the buttons. If everything looks good, congratulations, you’ve successfully replaced the battery!

FAQs

How often should I replace the battery?

Typically, the battery in a key fob lasts about 2-3 years. If your key fob starts showing signs of weakness, such as reduced range or delayed response, it might be time for a replacement.

Can I use a different type of battery?

It’s crucial to use the specified CR1616 coin battery. Using a different type may not fit properly or could cause damage to the key fob.

What if the key fob still doesn’t work?

If replacing the battery doesn’t resolve the issue, there might be another problem with the key fob. It could be a malfunctioning circuit board or another internal issue. In this case, consulting a professional might be necessary.

Is it safe to change the battery myself?

Yes, changing the battery is a straightforward process and safe to do yourself. Just ensure you follow the steps carefully and handle the components gently.

What if I lose the small screw?

If you lose the small screw, you can find replacements online or at a hardware store. Ensure you get the correct size to avoid damaging the key fob.

Where can I buy the CR1616 battery?

You can purchase the CR1616 battery on Amazon or at most electronics stores. It’s a common battery used in many small electronic devices.

Conclusion

Replacing the battery in your Honda Pilot key fob from 2005 to 2015 is a simple task that can save you time and money. With the right tools and this step-by-step guide, you’ll have your key fob working like new in no time. Remember to handle all components with care and test the key fob before considering the job complete.