Introduction
Replacing the battery in your Ford Explorer smart key fob might seem daunting, but it’s a straightforward process. This guide will walk you through the steps to replace the two CR2025 batteries in your key fob for models from 2016 and 2017. Following these instructions will ensure your key fob operates smoothly.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Tools and Materials Needed
Before starting, make sure you have the necessary tools and materials. Having everything ready will make the process easier and quicker.
- Small screwdriver
- Flathead screwdriver
- Two CR2025 batteries
- Clean surface to work on
Step 1: Locate the Battery Compartment
The first step is to locate the battery compartment on your key fob. The key fob has an internal valet key, and the battery compartment is on the back side, not where the buttons are.
Look for a small lever depression on the back. This is where you will start to separate the key fob to access the batteries.
Step 2: Separate the Key Fob
Using a small screwdriver, press down on the lever depression. This will help you to separate the two parts of the key fob. Sometimes, using your finger to press down and another tool to get some leverage can help.
Once you have some separation, gently work your way around to fully open the key fob. This will expose the internal valet key and the battery compartment.
Step 3: Remove the Internal Valet Key
After opening the key fob, you will see the internal valet key. This key needs to be removed to access the battery compartment properly.
Use a flathead screwdriver to carefully lift and remove the internal valet key. Be gentle to avoid damaging any parts.
Step 4: Access the Battery Compartment
With the internal valet key removed, you will see the battery compartment. The batteries are secured in place with a plastic piece that indicates the battery type and orientation.
Carefully lift this plastic piece to reveal the two CR2025 batteries. Take note of the orientation, as it’s crucial for the proper operation of the key fob.
Step 5: Replace the Batteries
Remove the old batteries and dispose of them properly. Insert the new CR2025 batteries, ensuring the correct orientation as indicated on the plastic piece.
- First battery: Plus side up
- Second battery: Negative side up
Make sure the plastic piece is securely placed between the two batteries.
Step 6: Reassemble the Key Fob
After replacing the batteries, it’s time to reassemble the key fob. Start by reattaching the middle part to the base of the fob, ensuring the connection points align correctly.
Be careful not to break any pieces during this step. If everything is aligned, the parts should click back together smoothly.
Step 7: Test the Key Fob
With the key fob reassembled, test it to ensure the new batteries are working correctly. Press the buttons to see if the key fob responds as expected.
If there are any issues, double-check the battery orientation and ensure all parts are securely connected.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Common Issues and Troubleshooting
Sometimes, you might encounter issues during the battery replacement process. Here are a few common problems and their solutions:
- Key fob not responding: Check battery orientation and connections.
- Difficulty separating parts: Use a flathead screwdriver for leverage.
- Broken pieces: Handle parts gently and avoid excessive force.
FAQ
Here are some frequently asked questions about the Ford Explorer key fob battery replacement:
What type of battery does the Ford Explorer key fob use?
The Ford Explorer key fob uses two CR2025 batteries.
Can I use other battery types?
No, using other battery types can damage the key fob. Always use CR2025 batteries.
How often should I replace the key fob batteries?
It’s recommended to replace the batteries every 1-2 years, depending on usage.
What if my key fob still doesn’t work after replacing the batteries?
Double-check the battery orientation and connections. If the issue persists, consult a professional.
Where can I buy CR2025 batteries?
You can purchase CR2025 batteries online or at most electronic stores.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Conclusion
Replacing the batteries in your Ford Explorer key fob is a simple task that can save you time and money. By following this guide, you’ll ensure your key fob is always in top working condition. Remember to handle all parts with care and double-check connections before reassembling the key fob.
With these steps, you’ll have a fully functional key fob in no time. Happy driving!