Ford Transit Connect Remote Key Fob Battery Replacement Guide

Introduction

Changing the battery in your Ford Transit Connect key fob is a simple task that can save you time and money. In this guide, I will walk you through the step-by-step process of replacing the battery in your key fob. This procedure applies to models from 2014 to 2019.

Tools and Materials Needed

Before you get started, gather the necessary tools and materials. You will need:

• Small flat-head screwdriver
• CR2032 coin battery

Having these items on hand will make the replacement process smooth and efficient.

Locate the Notch

First, identify the notch on your key fob. This is a small indentation located at the upper right corner of the fob. The notch is the key to separating the two halves of the fob.

Use a small flat-head screwdriver or another key to get into this notch. Insert the tool and twist gently to create a separation between the two pieces of the key fob.

Pry Apart the Key Fob

Once you have created an initial separation, move towards the middle of the key fob. This area often has a spot for a keyring. Continue to twist and pry apart the two pieces of the fob until they are completely separated.

Be careful not to use too much force, as this could damage the fob. Gentle, consistent pressure is key.

Remove the Old Battery

With the key fob open, you will see the old battery. The battery used in the Ford Transit Connect key fob is a CR2032 coin battery. Carefully remove the old battery from its compartment.

Note the orientation of the battery as you remove it. The positive side, marked with a plus sign and lettering, should be facing towards you.

Insert the New Battery

Take your new CR2032 coin battery and place it into the battery compartment. Ensure that the positive side is facing towards you, just like the old battery.

Make sure the battery is seated properly to ensure good contact with the terminals. A poorly seated battery can lead to malfunctioning of the key fob.

Reassemble the Key Fob

Before snapping the two halves of the key fob back together, check for any rubber pieces that may have come loose. These pieces are important for the proper functioning of the key fob and should be reinstalled if they have fallen out.

Align the two halves of the key fob and press them together until they snap into place. Ensure that all edges are properly aligned and securely fastened.

Test the Key Fob

After reassembling the key fob, test it to ensure that it is working properly. Press the buttons to verify that the fob is sending signals to your vehicle.

If the key fob is not working, double-check the battery orientation and ensure that the battery is properly seated. If issues persist, consider using a different CR2032 battery.

Conclusion

Replacing the battery in your Ford Transit Connect key fob is a straightforward process that can be completed in a matter of minutes. By following these steps, you can keep your key fob functioning properly and avoid the inconvenience of a dead battery.

Remember, the key to a successful battery replacement is to be gentle and methodical. With the right tools and a little patience, you can easily complete this task on your own.

FAQs

Here are some frequently asked questions about replacing the battery in a Ford Transit Connect key fob:

What type of battery does the key fob use?

The Ford Transit Connect key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

The key fob battery typically lasts 1-2 years. Replace it when the fob becomes unresponsive.

Can I use any brand of CR2032 battery?

Yes, any reputable brand of CR2032 battery should work. Ensure it is a 3-volt battery.

What if my key fob still doesn’t work after replacing the battery?

Double-check the battery orientation and ensure it is properly seated. If issues persist, try a different battery.

Do I need to reprogram the key fob after replacing the battery?

No, replacing the battery does not require reprogramming the key fob.

Can I use a different type of battery?

No, use only a CR2032 battery. Other types may not fit or function correctly.

Is it safe to replace the battery myself?

Yes, it is safe and straightforward. Just follow the steps outlined in this guide.

Where can I buy a CR2032 battery?

CR2032 batteries are available at most electronics stores and online retailers like Amazon.