GMC Acadia Key Fob Battery Replacement (2007 – 2017)

Introduction

In this guide, I’ll walk you through the steps to replace the battery in your GMC Acadia key fob. Whether you have the three-button version or the version without the center button, the process is the same. Follow these steps, and you’ll have a new battery in your key fob in under five minutes.

The only tools you’ll need are a CR2032 battery and a regular flathead screwdriver. If you don’t have a CR2032 battery, you can find one on Amazon by following the link in the video description.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Step-by-Step Battery Replacement

1. Locate the Seam

The first step is to find the small opening along the seam of the two halves of the key fob. This opening is located where the key ring attaches. It is very small but just enough space to fit a flathead screwdriver into.

2. Insert the Screwdriver

Once you’ve found the opening, insert your flathead screwdriver. Gently turn the screwdriver until the key fob starts to open. Once it is cracked open, you can use your fingers to pull it apart completely.

3. Remove the Circuit Board

With the key fob open, set down the back piece of plastic. Lift out the circuit board by grabbing onto the battery itself and gently lifting it up. This will make it easier to slide the old battery out of place.

4. Replace the Battery

Slide the old battery out and dispose of it. Make sure your new battery is a CR2032. When inserting the new battery, the positive side with the plus sign should face up. Slide the new battery into place.

5. Reassemble the Key Fob

Grab the circuit board and the front piece of the key fob that has the rubber inside. Drop the circuit board into the front piece, ensuring the battery is facing up. Push down on the battery to make sure it is sitting flat.

Next, take the back section of plastic and place it on top, making sure it is lined up correctly. Squeeze the two halves together until they snap back into place.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Congratulations! You’ve successfully replaced the battery in your GMC Acadia key fob. This new battery should last for a long time, ensuring your key fob remains functional.

If you found this guide helpful, feel free to like the video or leave a comment. For more tutorials on key fob battery replacements for almost every make and model, visit our website at FobBattery.com.

Frequently Asked Questions

What type of battery does the GMC Acadia key fob use?

The GMC Acadia key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery on Amazon or at most electronic and hardware stores.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Can I use any flathead screwdriver?

Yes, any regular flathead screwdriver will work for this task.

How often should I replace the key fob battery?

Key fob batteries typically last several years. Replace the battery when the key fob stops working or shows signs of low battery.

Is the battery replacement process the same for all GMC Acadia models?

Yes, the process is the same for GMC Acadia models from 2007 to 2017.

What should I do if my key fob still doesn’t work after replacing the battery?

Double-check that the battery is inserted correctly with the positive side facing up. If it still doesn’t work, the key fob may have another issue requiring professional assistance.

Can I replace the battery myself, or should I go to a professional?

You can easily replace the battery yourself by following the steps outlined in this guide.

What other resources are available for key fob battery replacements?

For more detailed guides and video tutorials, visit our website at FobBattery.com.

Additional Tips

1. Keep Spare Batteries

It’s always a good idea to keep a few spare CR2032 batteries on hand. This way, you’ll be prepared if your key fob battery dies unexpectedly.

2. Regular Maintenance

Regularly check your key fob for signs of wear and tear. If the buttons are sticking or the casing is damaged, it might be time for a replacement.

3. Test the Key Fob

After replacing the battery, test the key fob to ensure it’s working correctly. Lock and unlock your car doors to confirm the new battery is functioning.

4. Consult Your Manual

If you have any trouble, consult your vehicle’s owner manual for additional guidance on key fob maintenance and battery replacement.

5. Visit Our Website

For more information on key fob battery replacements and to find the right battery for your car, visit our website at FobBattery.com.

Final Thoughts

Replacing the battery in your GMC Acadia key fob is a simple task that can save you time and money. With just a few tools and minutes, you can ensure your key fob is always ready to go.

If you enjoyed this guide, check out our other tutorials for more helpful tips and tricks. Thank you for reading, and happy driving!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.