GMC Safari Key Fob Battery Replacement (1997 – 2005)

Introduction

Replacing the battery in your GMC Safari key fob is a straightforward task that anyone can accomplish. In this guide, I will walk you through the process step-by-step. You will learn how to replace the battery in just a few minutes, without needing to visit a dealership.

Tools You’ll Need

Before you start, gather the following tools:

• CR2032 coin battery
• Coin or flathead screwdriver

If you don’t already have a CR2032 battery, you can purchase one from Amazon. Check the link in the description for a quick and easy way to get the battery you need.

Finding the Seam

The first step is to locate the seam on your key fob. Look for the indentation near the key ring attachment point. This is where you will insert your tool to open the key fob.

Opening the Key Fob

Using a coin or flathead screwdriver, insert the tool into the indentation. Give it a gentle twist to crack open the key fob. It doesn’t require much force, so be careful not to apply too much pressure.

Once the key fob is open, you will see the battery inside. If you have long fingernails, you can use them to remove the old battery. If not, use a flathead screwdriver, car key, pen, or pencil to pry the battery out.

Removing the Old Battery

Identify the small indentation near the battery. This will help you get under the battery and lift it out. Carefully remove the old battery and dispose of it properly.

Inserting the New Battery

Take your new CR2032 battery and ensure the positive side, marked with a plus sign, is facing down. Snap the new battery into place, making sure it is securely seated.

Reassembling the Key Fob

With the new battery in place, align the two halves of the key fob and press them together until they click. Your key fob is now ready to use with a fresh battery.

This new battery should last a long time, saving you the hassle of frequent replacements and avoiding a trip to the dealership.

Conclusion

I hope this guide was helpful in showing you how to replace the battery in your GMC Safari key fob. If you have any questions or need further assistance, feel free to leave a comment or give the video a like. Your feedback is always appreciated.

For more tutorials on key fob battery replacements for various makes and models, visit our website at fobbattery.com. We have a wide range of guides to help you with all your key fob needs.

FAQ

What type of battery does my GMC Safari key fob use?

Your GMC Safari key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery on Amazon.

What tools do I need to replace the battery?

You will need a coin or flathead screwdriver to open the key fob and a new CR2032 battery.

How do I open the key fob?

Locate the indentation near the key ring attachment point. Insert a coin or flathead screwdriver into the indentation and twist gently to open the key fob.

How do I remove the old battery?

Use your fingernails or a flathead screwdriver, car key, pen, or pencil to pry the old battery out of the key fob.

How do I insert the new battery?

Ensure the positive side of the new CR2032 battery is facing down. Snap it into place securely.

How do I reassemble the key fob?

Align the two halves of the key fob and press them together until they click.

How long will the new battery last?

The new battery should last a long time, providing you with reliable performance for your key fob.

Do I need to visit a dealership to replace the battery?

No, you can replace the battery yourself easily and save the cost and time of visiting a dealership.