GMC Savana Key Fob Battery Replacement (1997 – 2007)

Introduction

Replacing the battery in your GMC Savana key fob is a simple task that can save you time and money. In this guide, I’ll walk you through the steps to swap out the old battery with a new one. Whether you have the version with the “rear 2x” button or the one with an extra panic button, the process is the same.

The only tools you’ll need are a coin or a flathead screwdriver and a CR2032 battery. Let’s get started.

Tools and Battery Required

Before diving into the replacement process, gather the necessary tools and materials:

• Coin or flathead screwdriver
• CR2032 battery

If you don’t have a CR2032 battery on hand, you can purchase one online. These batteries are inexpensive and readily available.

Opening the Key Fob

Locate the Slot

First, examine the bottom of the key fob where the key ring attaches. You’ll notice a slot along the seam. This is where you’ll insert your coin or screwdriver.

Choose a larger coin, like a quarter, for easier handling. Insert the coin into the slot and give it a twist. The key fob should snap open, giving you access to the battery compartment.

Remove the Old Battery

Now that the key fob is open, you can see the battery. Some people can lift the battery out with their fingernail. If that’s not possible, use a flathead screwdriver or any small tool like a pen, pencil, or bobby pin.

Look for a small indentation next to the battery. Insert your tool into this spot and gently lift the battery out. It should come out easily.

Installing the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing down. Place the battery into the compartment and press it down so it sits flat.

Once the new battery is in place, align the front and back halves of the key fob and press them together until they snap shut. Your key fob should now be operational with a new battery.

Testing the Key Fob

After replacing the battery, test the key fob to ensure it’s working correctly. Try locking and unlocking your vehicle or using any additional buttons like the trunk release or panic button.

If everything is functioning as expected, you’ve successfully replaced the battery. If not, double-check that the battery is installed correctly with the positive side facing down and that the key fob is properly closed.

Advantages of DIY Battery Replacement

Replacing the key fob battery yourself has several benefits:

• Cost savings
• Convenience
• Quick process

By doing it yourself, you avoid the cost and time associated with visiting a dealership or locksmith. The entire process takes just a few minutes and can be done with common household items.

Common Issues and Solutions

Key Fob Not Working After Battery Replacement

If your key fob isn’t working after replacing the battery, check the following:

• Battery orientation
• Proper closure
• Battery contacts

Ensure the battery is installed with the positive side facing down and that the key fob is snapped shut. Also, check that the battery contacts are clean and free of corrosion.

Difficulty Opening the Key Fob

If you’re having trouble opening the key fob, try using a larger coin or a flathead screwdriver for more leverage. Be gentle to avoid damaging the plastic casing.

Conclusion

Replacing the battery in your GMC Savana key fob is a straightforward process that can be done in minutes. With just a coin or screwdriver and a new CR2032 battery, you can have your key fob working like new.

By following this guide, you can save time and money while ensuring your key fob remains functional. Remember, there’s no need to visit a dealership for a simple battery replacement.

FAQs

What type of battery does the GMC Savana key fob use?

The GMC Savana key fob uses a CR2032 coin battery.

Can I use a different type of battery?

No, it’s recommended to use a CR2032 battery as specified for optimal performance.

How often should I replace the key fob battery?

Typically, the battery should last several years. Replace it when the key fob starts to show signs of low battery, such as reduced range or intermittent functionality.

Do I need to reprogram the key fob after replacing the battery?

No, replacing the battery does not require reprogramming the key fob. It should work immediately after the new battery is installed.

What if my key fob still doesn’t work after replacing the battery?

If the key fob doesn’t work after replacing the battery, ensure the battery is installed correctly and the key fob is properly closed. Check for any signs of damage or corrosion. If the issue persists, consult a professional.

Can I replace the key fob battery myself?

Yes, replacing the key fob battery is a simple DIY task that can be done with minimal tools and effort.

Where can I buy a CR2032 battery?

CR2032 batteries are available at most electronics stores, supermarkets, and online retailers like Amazon.

What tools do I need to open the key fob?

You can use a coin or a flathead screwdriver to open the key fob.