GMC Savana Key Fob Battery Replacement Guide (2008 – 2020)

Introduction

Replacing the battery in your GMC Savana key fob is a simple task that can save you time and money. This guide will walk you through the process step-by-step, ensuring that you can complete the task in under five minutes.

Whether your key fob has an open trunk button or not, the process remains the same. You will need a flathead screwdriver and a CR2032 battery.

Materials Needed

• Flathead screwdriver
• CR2032 battery

If you don’t have a CR2032 battery, you can find it on Amazon for just a few bucks. Check the link in the description for quick access.

Step-by-Step Instructions

Step 1: Open the Key Fob

Look at the bottom of your key fob where the key ring attaches. Just to the right of this area, you will see a slot along the seam. Insert your flathead screwdriver into this slot and wiggle it gently.

Once the screwdriver is in place, turn it slightly to open the key fob. The circuit board may fall out, which is fine and can make the process easier.

Step 2: Remove the Old Battery

If the circuit board does not come out easily, repeat the previous step. Once the board is out, push on the old battery to slide it out. Dispose of the old battery properly.

Step 3: Insert the New Battery

Take your new CR2032 battery and ensure that the positive side (marked with a plus sign) is facing up. Slide it into place in the circuit board.

Step 4: Reassemble the Key Fob

Place the circuit board back into the front part of the key fob, making sure the battery is facing up. Push down gently to ensure that the battery is sitting flat.

Next, put the back cover of the key fob back in place and squeeze it to snap everything together.

Alternative Key Fob Design

If you have a different version of the GMC Savana key fob, the process is still the same. The only difference might be the way the battery is held in place.

For some models, you may find a piece of metal holding the battery. In this case, slide the battery out with your thumb and insert the new one with the positive side facing up.

Why Replace the Battery Yourself?

Replacing the battery yourself saves you a trip to the dealership and potentially a lot of money. These batteries are inexpensive, and the process is straightforward.

Additionally, learning to do this yourself can be empowering and may come in handy for other key fob models in the future.

Additional Resources

If you need help with other key fobs, our channel offers tutorials for almost every make and model. You can also visit our website at fobbattery.com for more information and guides.

FAQ

What tools do I need to replace the battery?

You will need a flathead screwdriver and a CR2032 battery.

How long does it take to replace the battery?

The entire process takes under five minutes.

Can I use any CR2032 battery?

Yes, any CR2032 battery will work for your GMC Savana key fob.

What if the circuit board falls out?

It’s okay if the circuit board falls out. It can make the process easier.

Do both versions of the key fob use the same battery?

Yes, both versions use the CR2032 battery.

Where can I buy a CR2032 battery?

You can find CR2032 batteries on Amazon or at most electronics stores.

Do I need to reprogram the key fob after replacing the battery?

No, you do not need to reprogram the key fob after replacing the battery.

What should I do with the old battery?

Dispose of the old battery properly according to local regulations.

Conclusion

Replacing the battery in your GMC Savana key fob is a quick and easy process that can save you time and money. With just a flathead screwdriver and a CR2032 battery, you can complete the task in under five minutes.

If you ever need help with another key fob, our channel and website offer tutorials for a wide range of makes and models. Keep this guide handy for future reference and enjoy the convenience of maintaining your key fob yourself.