Introduction
Replacing the battery in your GMC Yukon key fob is a simple task that can save you time and money. Whether you have the four-button version or the three-button version, the process is the same. In this guide, I’ll walk you through the steps to replace the battery in your key fob, ensuring it functions properly once again.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before starting, gather the following tools and materials:
- Flathead screwdriver
- CR2032 battery
If you don’t have a CR2032 battery, you can purchase one from Amazon using the link provided in the description.
Step-by-Step Instructions
Step 1: Locate the Indentation
First, look at the bottom of your key fob, near the key ring attachment. You’ll see an indentation along the seam of the plastic casing.
Step 2: Insert the Screwdriver
Take your flathead screwdriver and insert it into the indentation. Wiggle it gently until it gets stuck.
Step 3: Open the Key Fob
Turn the screwdriver to pry the key fob open. Once it starts to open, you can use your fingers to pull it apart completely.
Step 4: Remove the Battery
With the key fob open, you’ll see the battery and the circuit board. Carefully lift the battery out by gently grabbing the circuit board and sliding the battery out.
Step 5: Insert the New Battery
Take your new CR2032 battery and ensure the positive side is facing up. Slide it into the metal component of the circuit board.
Step 6: Reassemble the Key Fob
Place the circuit board back into the front of the key fob, ensuring the battery is facing up. Click the back section of the plastic casing back onto the key fob. Give it a firm squeeze to ensure everything is secure.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
You’ve successfully replaced the battery in your GMC Yukon key fob. This new battery should last for years, and you’ve saved money by doing it yourself. If you found this guide helpful, please let me know in the comments or by giving this post a like. For more key fob tutorials, visit our website or subscribe to our channel.
Frequently Asked Questions
What type of battery does the GMC Yukon key fob use?
The GMC Yukon key fob uses a CR2032 battery.
Can I use any flathead screwdriver to open the key fob?
Yes, any standard flathead screwdriver will work for this task.
How long does the new battery last?
A new CR2032 battery should last for several years under normal use.
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and straightforward if you follow the instructions carefully.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery from Amazon or most electronics stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What should I do with the old battery?
Dispose of the old battery properly by taking it to a battery recycling center.
Do I need to reprogram the key fob after replacing the battery?
No, you do not need to reprogram the key fob after replacing the battery.
What if my key fob still doesn’t work after replacing the battery?
If your key fob still doesn’t work, check the battery’s orientation and ensure it’s properly seated. If it still doesn’t work, the key fob itself may be faulty.