Introduction
Replacing the battery in your Honda CR-V key fob is a simple task that can save you time and money. This guide will walk you through the process step-by-step, ensuring that you can do it yourself with minimal hassle.
The key fob battery used in Honda CR-V models from 2014 to present is the CR1620 coin battery. You can easily find this battery online or at your local store.
In addition to the battery, you will need a precision screwdriver, also known as a jeweler’s set, to remove a small screw on the key fob. Let’s get started!
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
- CR1620 coin battery
- Precision screwdriver
- Flathead screwdriver
Step-by-Step Instructions
Step 1: Locate the Screw
Flip your Honda CR-V key fob over. On the backside, you will see a very small screw. This screw holds the key fob together.
Step 2: Remove the Screw
Using a precision screwdriver, carefully remove the small screw. If this is your first time doing this, it may be a bit difficult. You may need to press down firmly to get enough traction on the screw.
Once the screw is loose, remove it and set it aside in a safe place.
Step 3: Separate the Key Fob Sections
Look for a small notch on the side of the key fob. Insert a flathead screwdriver into this notch and twist gently. This will help you separate the two sections of the key fob.
Don’t worry about breaking anything. As long as you stay in the notch and twist carefully, the key fob will come apart easily.
Step 4: Access the Battery
With the key fob open, you will see the CR1620 coin battery. Use the flathead screwdriver to gently pop the battery out of its compartment.
Step 5: Insert the New Battery
Take your new CR1620 battery and make sure the positive side is facing down. Insert the battery into the compartment, keeping it towards the top at first to avoid the prongs at the bottom.
Ensure that no positive signs or lettering are visible once the battery is inserted. This confirms that the battery is in the correct orientation.
Step 6: Reassemble the Key Fob
Place the two sections of the key fob back together. They should snap together easily and securely.
Finally, replace the small screw you removed earlier. Tighten it with the precision screwdriver to secure the key fob.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Conclusion
And that’s it! You’ve successfully replaced the battery in your Honda CR-V key fob. This simple process can be done in just a few minutes, saving you a trip to the dealership and the associated costs.
Remember to always have a spare CR1620 battery and a precision screwdriver on hand for future battery replacements.
Frequently Asked Questions (FAQ)
How often should I replace the key fob battery?
The battery in your key fob typically lasts 1-2 years. If you notice a decrease in range or the key fob stops working, it may be time to replace the battery.
Can I use a different type of battery?
No, it is recommended to use the CR1620 coin battery as specified by Honda. Using a different type of battery may cause damage to the key fob.
Where can I buy the CR1620 battery?
You can purchase the CR1620 battery online through retailers like Amazon or at local stores that sell batteries and electronics.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
What if I lose the small screw?
If you lose the small screw, you may be able to find a replacement at a hardware store or by purchasing a precision screwdriver set that includes small screws.
Is it safe to open the key fob myself?
Yes, it is safe to open the key fob yourself as long as you follow the instructions carefully. Be gentle when prying the sections apart to avoid damaging any components.
Can I get the battery replaced at a dealership?
Yes, you can get the battery replaced at a Honda dealership. However, doing it yourself is a quick and cost-effective solution.
Do I need to reprogram the key fob after replacing the battery?
No, replacing the battery does not require reprogramming the key fob. It should work as usual once the new battery is installed.
What are the signs that the key fob battery is low?
Signs of a low key fob battery include reduced range, intermittent functioning, or the key fob not working at all.