Introduction to Honda Fit Key Battery Replacement
Replacing the battery in your Honda Fit key fob is a straightforward process. This guide will walk you through each step to ensure your key fob works like new. The process is applicable for models from 2015 to the present.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools You Will Need
Before you start, make sure you have the following tools:
- CR1620 Coin Battery
- Precision Screwdriver Set
You can find these items easily online or at your local hardware store. Links for purchasing these items are provided for your convenience.
Step-by-Step Battery Replacement Guide
Follow these steps to replace the battery in your Honda Fit key fob:
Step 1: Flip Over the Key Fob
Start by flipping the key fob over. You will see a tiny screw on the back.
Step 2: Use a Precision Screwdriver
Take your smallest precision screwdriver. Press hard to get traction on the screw, and then unscrew it. This step may be challenging the first time.
Step 3: Locate the Notch
On the side of the key fob, you’ll find a small notch. Insert your flat-head screwdriver into this notch and twist to separate the two pieces of the fob.
Step 4: Remove the Back of the Key Fob
Continue twisting until the back of the key fob pops off, revealing the internal battery.
Step 5: Remove the Old Battery
Use your flat-head screwdriver to gently pop out the old battery. The battery type is a CR1620 3-volt battery.
Step 6: Insert the New Battery
Place the new CR1620 battery into the slot. Make sure to push the top part with the metal prongs first, followed by the bottom part.
Step 7: Reassemble the Key Fob
Snap the back of the key fob back into place. Ensure it clicks securely.
Step 8: Screw the Key Fob Back Together
Replace the tiny screw and tighten it with your precision screwdriver. Your key fob should now be fully functional.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Common Issues and Troubleshooting
Sometimes, you may encounter issues when replacing the battery. Here are some common problems and their solutions:
Difficulty Removing the Screw
If the screw is hard to remove, apply more pressure with the screwdriver. Using a high-quality precision screwdriver can also help.
Key Fob Not Snapping Back Together
Ensure that the new battery is correctly positioned. The fob should snap together easily if everything is aligned properly.
FAQ
What type of battery does the Honda Fit key fob use?
The Honda Fit key fob uses a CR1620 3-volt battery.
Do I need any special tools?
A precision screwdriver set is recommended for this task. It helps in easily removing the small screw on the key fob.
How often should I replace the key fob battery?
Generally, the key fob battery should be replaced every 1-2 years, depending on usage.
Can I use a different type of battery?
No, it is recommended to use the CR1620 3-volt battery as specified by the manufacturer.
Where can I buy the CR1620 battery?
You can purchase the CR1620 battery online or at most electronics stores. Links are provided for your convenience.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Conclusion
Replacing the battery in your Honda Fit key fob is a simple task that can save you time and money. With the right tools and this step-by-step guide, you can quickly get your key fob working again. Always ensure to use the correct battery type and handle the key fob components with care to avoid any damage.