Honda Fit Key Battery Replacement Guide 2015 – 2020

Introduction

Replacing the battery in your Honda Fit key fob is a simple process. This guide will walk you through each step to ensure you can do it quickly and easily. The key fob battery used in Honda Fit models from 2015 to the present is a CR2032 coin battery.

Tools and Materials Needed

Before you start, make sure you have the following:

• CR2032 coin battery
• Valet key

Step 1: Remove the Valet Key

First, flip the key fob over to the backside. You will see a small knob with an arrow pointing down. Pull this knob towards you to release the valet key. Once the valet key is out, you can use it to open the key fob.

Step 2: Split the Key Fob

The key fob has a split all the way around it, making it easy to open. Take the valet key and insert it into the slot in the middle of the fob. Twist the key to pop the fob into two pieces. This will give you access to the battery compartment.

Step 3: Remove the Old Battery

With the key fob open, you can now see the old battery. Use the valet key to gently pop out the old CR2032 coin battery. Be careful not to damage any of the internal components.

Step 4: Insert the New Battery

Take your new CR2032 coin battery and make sure the letters are facing towards you. This ensures that the positive side is up. There are two longer teeth that hold the battery in place. Insert the battery by sliding it under these teeth first, then push down to secure it.

Step 5: Reassemble the Key Fob

Once the new battery is in place, you can snap the key fob back together. Make sure it clicks securely. Finally, reinsert the valet key into its original position.

Conclusion

And that’s it! You’ve successfully replaced the battery in your Honda Fit key fob. This simple process can save you time and money compared to going to a dealership. Always keep a spare CR2032 battery handy for future replacements.

Frequently Asked Questions

How often should I replace the key fob battery?

Typically, a CR2032 battery lasts for about 1-2 years, depending on usage.

What if my key fob still doesn’t work after replacing the battery?

Ensure the battery is correctly installed. If it still doesn’t work, the key fob itself may need to be replaced.

Can I use a different type of battery?

No, you should only use a CR2032 coin battery for the Honda Fit key fob.

Is it safe to replace the key fob battery myself?

Yes, replacing the key fob battery is a straightforward process and is safe to do yourself.

Will replacing the battery reset my key fob?

No, replacing the battery will not reset your key fob. It will continue to work as usual.

Do I need any special tools?

No special tools are required. You only need the valet key that comes with your key fob.

Can I take my key fob to a professional?

Yes, if you are not comfortable doing it yourself, you can take it to a professional. However, it is an easy process to do at home.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from most electronics stores, supermarkets, or online platforms like Amazon.

Additional Tips

Here are some additional tips to keep in mind:

• Always handle the key fob gently.
• Avoid touching the battery terminals with your fingers.
• Dispose of the old battery properly.

Final Thoughts

Replacing the battery in your Honda Fit key fob is a quick and easy process that can be done at home. By following this guide, you can ensure that your key fob remains functional without the need for professional assistance. Always use the correct battery type and handle the key fob with care to avoid any damage.