Honda Pilot Key Battery Replacement Guide (2016 – 2020)

Introduction to Honda Pilot Key Battery Replacement

Replacing the battery in your Honda Pilot smart key is a simple task that you can do yourself. This guide will walk you through the steps to change the CR2032 coin battery in the key fob for Honda Pilot models from 2016 to the present.

With just a few minutes of your time and a new battery, you can ensure that your key fob remains functional and reliable.

Gathering Your Tools and Materials

Before you start the battery replacement process, you’ll need a few items:

• CR2032 coin battery
• Your Honda Pilot smart key

The CR2032 coin battery is a three-volt battery that’s commonly used in small electronics. You can easily find it online or at most electronics stores.

Removing the Valet Key

First, locate the small knob on the back of your key fob. Press this knob to release the internal valet key. The valet key is a small, separate key that can be used in emergencies.

Once the valet key is removed, you’ll use it to help open the key fob.

Opening the Key Fob

With the valet key in hand, locate the middle section of the key fob. Insert the valet key between the two pieces of the fob to gain leverage.

Gently twist the valet key towards and away from you to pop the fob open. The design of the key fob is robust, so you don’t have to worry about breaking it.

Removing the Old Battery

Once the key fob is open, you’ll see the internal battery. The Honda Pilot key fob uses a CR2032 coin battery. To remove the old battery, use the valet key to pop it out from the left side.

Be careful not to damage the battery contacts during this process.

Inserting the New Battery

Take your new CR2032 coin battery and look for the longer prongs on the right side of the key fob. Insert the battery under these prongs first. This method makes it easier to secure the battery in place.

Once the battery is in position, push it down gently to ensure it’s properly seated.

Reassembling the Key Fob

After the new battery is in place, take the other half of the key fob and snap it back together. Make sure all parts are securely aligned and the fob is fully closed.

Finally, reinsert the valet key into its slot on the key fob.

Testing Your New Battery

With the new battery installed, test your key fob to ensure it works correctly. You should notice an immediate improvement in response and range.

If the key fob doesn’t work, double-check that the battery is properly seated and the fob is correctly assembled.

Maintenance Tips for Your Key Fob

To keep your key fob in good condition, follow these maintenance tips:

• Replace the battery every 1-2 years
• Avoid exposing the fob to moisture
• Keep the fob away from extreme temperatures
• Handle the fob gently to prevent damage

Conclusion

Replacing the battery in your Honda Pilot smart key is a straightforward process that can save you time and money. By following the steps outlined in this guide, you can ensure your key fob remains functional and reliable.

Remember to test your key fob after replacing the battery and follow the maintenance tips to prolong its lifespan.

Frequently Asked Questions

What type of battery does the Honda Pilot key fob use?

The Honda Pilot key fob uses a CR2032 coin battery, which is a three-volt battery commonly found in small electronics.

How often should I replace the battery in my key fob?

It’s recommended to replace the battery in your key fob every 1-2 years to ensure optimal performance.

Can I use a different type of battery for my key fob?

No, it’s important to use the correct type of battery (CR2032) to ensure compatibility and proper function of your key fob.

What should I do if my key fob doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, double-check that the battery is properly seated and the fob is correctly assembled. If it still doesn’t work, you may need to consult a professional for further assistance.

Is it safe to open the key fob myself?

Yes, the Honda Pilot key fob is designed to be opened by the user for battery replacement. Just be gentle and follow the steps outlined in this guide to avoid damaging the fob.

Can I use rechargeable batteries in my key fob?

It’s not recommended to use rechargeable batteries in your key fob, as they may not provide the same performance and longevity as standard CR2032 batteries.

What should I do with the old battery?

Dispose of the old battery properly by following local regulations for battery disposal. Many electronics stores and recycling centers accept used batteries for safe disposal.

How can I prolong the life of my key fob battery?

To prolong the life of your key fob battery, avoid exposing the fob to moisture, extreme temperatures, and handle it gently to prevent damage. Regularly check and replace the battery every 1-2 years.

Where can I purchase a replacement CR2032 battery?

You can purchase a CR2032 battery online or at most electronics stores. They are widely available and relatively inexpensive.