Introduction
Your Kia Soul key fob is an essential component of your vehicle. It provides convenience and security. However, like all battery-operated devices, the key fob’s battery will eventually need replacement.
This guide will show you how to change the internal battery in a Kia Soul key fob. This method applies to models from 2014 to 2019 and requires a CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Materials Needed
- Flathead screwdriver
- CR2032 battery
Step-by-Step Instructions
Step 1: Remove the Internal Key
First, flip the key fob over to the back. There is a button that you need to hold down. This will allow you to remove the internal key.
Once the internal key is out, set it aside for now.
Step 2: Open the Key Fob
Look for an indentation opposite the keyhole. Insert your flathead screwdriver into this indentation.
Hold the key fob gently and twist the screwdriver. This will start to open the device. Once it begins to open, you can use your fingers to pull it apart.
You may need to twist the screwdriver down the side of the fob to loosen it further.
Step 3: Remove the Old Battery
With the key fob open, you’ll see the battery. Use your flathead screwdriver to gently lift the battery out from the bottom section.
This can be a bit tricky, but once you get the corner of the screwdriver under the battery, it should pop out.
Step 4: Insert the New Battery
Take your new CR2032 battery. Ensure the positive side faces down. Click it back into place.
Step 5: Reassemble the Key Fob
Before closing the key fob, ensure the rubber component is aligned with the circuit board. This component has a D shape, making it easy to align.
Once everything is in place, gently push it down. Set the back piece on top and click it into place.
Finally, reinsert the internal key.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Common Issues and Troubleshooting
Key Fob Not Opening
If you have trouble opening the key fob, ensure you are inserting the screwdriver into the correct indentation. Applying gentle but firm pressure usually does the trick.
Battery Not Popping Out
Removing the old battery can be tricky. Make sure you’re lifting from the bottom section with the corner of your screwdriver.
Key Fob Not Working After Battery Replacement
If your key fob doesn’t work after replacing the battery, double-check that the new battery is correctly oriented with the positive side facing down.
Also, ensure that the rubber component is aligned correctly with the circuit board.
Conclusion
Changing the battery in your Kia Soul key fob is a straightforward process. With a flathead screwdriver and a CR2032 battery, you can do it yourself in just a few minutes.
If you found this guide helpful, let us know in the comments or drop us a like. For more information on key fob maintenance, check out our YouTube channel or visit us at FobBattery.com.
Frequently Asked Questions (FAQ)
What type of battery does the Kia Soul key fob use?
The Kia Soul key fob uses a CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Can I use a CR2025 battery instead?
While a CR2025 battery may work, we recommend using a CR2032 battery for optimal performance.
How often should I replace the key fob battery?
It’s a good idea to replace the battery every 1-2 years or when you notice a decrease in performance.
What should I do if the key fob still doesn’t work after replacing the battery?
Double-check the battery orientation and ensure all components are correctly aligned. If issues persist, consult a professional.