Introduction
Replacing the battery in your Honda Fit key fob is a straightforward process that can save you time and money. This guide will walk you through the step-by-step process of changing the battery in a key fob used from 2009 to 2013.
- IN THE BOX: 6-pack of CR1616 3-volt lithium coin cell replacement batteries for small electronic devices
- DEVICE COMPATIBLE: Ideal for watches, calculators, games, medical devices, and more
- LONG LASTING: Long-lasting, reliable battery life; performs in extreme temperatures
Tools Needed
Before you start, make sure you have the necessary tools. You will need a small Phillips screwdriver and a flathead screwdriver. A precision screwdriver set is ideal for this task and can be purchased for a few dollars on Amazon.
- Small Phillips screwdriver
- Flathead screwdriver
- New CR1616 battery
Step 1: Remove the Phillips Screw
The first step is to locate the small Phillips screw at the base of the key fob. Use your Phillips screwdriver to remove this screw. This might be challenging the first time, so apply firm pressure to get enough traction.
Once the screw is removed, set it aside in a safe place. You will need it later when reassembling the key fob.
Step 2: Open the Key Fob
With the screw removed, you can now open the key fob. Locate the notch in the middle of the key and insert your flathead screwdriver into it. Twist the screwdriver to create leverage, and the base of the key fob should come apart easily.
Be mindful of the small notch at the top, which helps hold the key fob together. Gently pull the two halves apart and set aside the outer casing.
Step 3: Remove the Internal Section
Next, you need to remove the internal section of the key fob. There is another notch in the upper right corner of the internal section. Insert your flathead screwdriver into this notch and twist to pop off the internal section.
You will now have access to the battery compartment.
Step 4: Replace the Battery
The battery in your key fob is a CR1616 3-volt coin battery. Use your flathead screwdriver to gently pry out the old battery. When inserting the new battery, ensure that the positive side (marked with a plus sign) is facing away from you.
You can purchase a CR1616 battery on Amazon. Buy Amazon Basics 6-Pack CR1616 Lithium Coin Cell Battery.
Step 5: Reassemble the Key Fob
With the new battery in place, it’s time to reassemble the key fob. Start by placing the internal section back into the outer casing. Ensure that the small notch at the top is aligned correctly.
Once the internal section is in place, snap the two halves of the key fob together. Finally, reinsert the small Phillips screw to secure the key fob.
- IN THE BOX: 6-pack of CR1616 3-volt lithium coin cell replacement batteries for small electronic devices
- DEVICE COMPATIBLE: Ideal for watches, calculators, games, medical devices, and more
- LONG LASTING: Long-lasting, reliable battery life; performs in extreme temperatures
Conclusion
Replacing the battery in your Honda Fit key fob is a simple task that can be completed in a few minutes. By following these steps, you can ensure that your key fob continues to function correctly without the need for professional assistance.
For more detailed guides on key fob maintenance, visit