Introduction
Replacing the battery in your Ford Explorer’s key fob might seem daunting, but it’s a straightforward process. This guide will walk you through the steps to replace the battery in the rounded key fob used in 2011-2015 Ford Explorer models.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools You Will Need
Before you start, gather the necessary tools. You’ll need a box cutter and a small flat-head screwdriver. These tools will help you open the key fob and replace the battery.
- Box cutter
- Flat-head screwdriver
Step-by-Step Guide
Follow these steps to replace the battery in your key fob:
Scoring the Key Fob
First, use the box cutter to score around the indentation on the key fob. This indentation goes all the way around the key, and scoring it will help you pry the key apart.
Prying Open the Key Fob
Next, take the small flat-head screwdriver and find the indentation at the upper part of the key. Slowly work your way around the key, prying it apart. Be patient and gentle to avoid damaging the key fob.
Removing the Back Cover
Once you’ve pried the key apart, remove the back cover. You may see a small lining covering the battery. If this lining comes off, that’s fine; you’ll need to remove it to access the battery.
Replacing the Battery
Now you can see the battery, which is a CR2032. Use the flat-head screwdriver to pop the old battery out. Then, place the new CR2032 battery into the key fob.
Ensure the battery is correctly positioned and that the rubber mat piece, which adds a buffer between the key and the back cover, is in place.
Reassembling the Key Fob
Before snapping the key back together, you can add a small amount of super glue around the edges for extra security. Line up the backing with the key fob and press it all the way around to ensure it’s securely closed.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Ford Explorer’s key fob is a simple process that you can do at home with minimal tools. By following these steps, you can save time and money compared to having a professional do it.
For those interested in purchasing a replacement battery, you can buy a CR2032 battery on Amazon.
FAQs
What type of battery does the Ford Explorer key fob use?
The Ford Explorer key fob uses a CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace my key fob battery?
Key fob batteries typically last several years. Replace them when the key fob starts to malfunction or the range decreases.
Can I use any brand of CR2032 battery?
Yes, any brand of CR2032 battery will work. However, it’s recommended to use a reliable brand for longer-lasting performance.
Is it necessary to use super glue when reassembling the key fob?
Using super glue is optional. It provides extra security, but the key fob should stay together without it if snapped properly.
What if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, ensure the battery is correctly installed. If the problem persists, there may be an issue with the key fob itself.