Introduction
Replacing the battery in your 2019 Ford Ranger key fob is a straightforward process. In this guide, I’ll walk you through each step to ensure your key fob is working perfectly again. Let’s dive in and get your key fob back in action.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Identifying Your Key Fob
The key fob for the 2019 Ford Ranger features a flip-out key design. This reboot of the Ranger line includes a modern key fob that is both functional and stylish. If your key fob looks like the one described, you’re in the right place.
Tools You’ll Need
Before you start, gather the necessary tools:
- Small flat-head screwdriver
- New CR2032 three-volt battery
Having these tools on hand will make the process smooth and efficient.
Step-by-Step Battery Replacement
Follow these steps to replace the battery in your key fob:
Step 1: Flip Out the Key
First, flip out the key from the fob. This will give you better access to the base of the fob where you’ll be working.
Step 2: Locate the Indentation
At the base of the fob, there’s a small indentation near the lock symbol. This is where you’ll insert your screwdriver to separate the backing.
Step 3: Pry Open the Backing
Using the flat-head screwdriver, gently pry apart the backing of the fob. Be careful to avoid damaging the plastic. The backing should come off with a bit of effort.
Step 4: Remove the Old Battery
Once the backing is off, you’ll see the old CR2032 battery. Carefully pop it out and set it aside for disposal.
Step 5: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing towards you. Place the battery into the slot and press it down firmly.
Step 6: Reassemble the Key Fob
After the new battery is in place, align the backing with the fob and press it back into position. It should snap back into place easily.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Testing Your Key Fob
With the new battery installed, it’s time to test your key fob. Press the buttons to ensure they respond correctly. If everything is working, you’ve successfully replaced the battery.
Additional Tips
Here are a few additional tips to keep in mind:
- Keep spare batteries on hand
- Avoid excessive force when prying open the fob
- Dispose of old batteries properly
Where to Buy a New Battery
If you need a new CR2032 battery, you can find them easily online. I recommend purchasing from Amazon.com for convenience and reliability.
Frequently Asked Questions
Here are some common questions about replacing the key fob battery for a 2019 Ford Ranger:
How often should I replace the key fob battery?
Typically, key fob batteries last between 1-2 years. Replace the battery when you notice a decrease in range or response time.
Can I use a different type of battery?
No, it’s important to use a CR2032 three-volt battery. Other types may not fit or provide the correct power.
What if my key fob still doesn’t work after replacing the battery?
If your key fob isn’t working, check the battery orientation and ensure it’s properly seated. If issues persist, consult your vehicle’s manual or a professional.
Where can I find more information?
For more detailed guides and information, visit the Ford Ranger key fob battery replacement page.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your 2019 Ford Ranger key fob is a simple task that can save you time and money. With this guide, you now have all the information you need to perform the replacement confidently. Keep your key fob functioning optimally and enjoy the convenience it provides.