Introduction
Replacing the battery in your BMW X1 key fob is a straightforward process that you can easily do yourself. This guide will walk you through the necessary steps to ensure your key fob is working perfectly.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Identifying Your Key Fob
The key fob we are discussing is specific to the BMW X1 F48 model, which covers the years 2015 to 2019. This sleek-looking fob is used in various BMW X1 models including sDrive18i, sDrive20i, xDrive25i, xDrive25Le, sDrive16d, sDrive18d, sDrive20d, and xDrive25d.
Tools You Will Need
Before you start, make sure you have the following tools:
- CR2032 coin battery
- Small flat-head screwdriver
You can find the CR2032 battery on Amazon.com.
Step-by-Step Guide
Follow these steps to replace the battery in your BMW X1 key fob:
Remove the Valet Key
First, press the side button on your key fob to release the valet key. Once the valet key is removed, you will see a small hole that gives you access to the internal components of the key fob.
Access the Battery Compartment
Insert a small flat-head screwdriver into the hole. Gently pry open the back cover of the key fob. Alternatively, you can use the valet key itself to open the back cover.
Remove the Old Battery
Once the back cover is off, you will see the battery compartment. The battery is held in place by a small holder. Carefully pop out the old CR2032 battery. The easiest way to do this is by lifting it from the top, as the bottom holder can be a bit tight.
Insert the New Battery
Take your new CR2032 battery and make sure the positive side (the side with the lettering) is facing you. Insert the battery into the holder, starting with the base first. Make sure it is securely in place.
Reassemble the Key Fob
Replace the back cover of the key fob by aligning the slanted side first. Press it down until it snaps into place. Finally, reinsert the valet key back into its slot.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Final Checks
After replacing the battery, press a few buttons on the key fob to ensure it’s working correctly. If everything is functioning as expected, you have successfully replaced the battery in your BMW X1 key fob.
Common Issues and Solutions
Sometimes, you might encounter issues even after replacing the battery. Here are some common problems and their solutions:
- Key fob not working: Ensure the battery is correctly inserted.
- Loose battery: Make sure the battery holder is secure.
- Damaged key fob: If the key fob is damaged, consider replacing it.
FAQ
What type of battery does the BMW X1 key fob use?
The BMW X1 key fob uses a CR2032 coin battery.
Where can I buy the CR2032 battery?
You can purchase the CR2032 battery from Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace the key fob battery?
Typically, the key fob battery should be replaced every 1-2 years, depending on usage.
Can I use any other battery type?
No, it is recommended to use a CR2032 battery for optimal performance.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, check if the battery is correctly inserted. If the issue persists, consider consulting a professional or replacing the key fob.
Conclusion
Replacing the battery in your BMW X1 key fob is an easy task that can save you time and money. By following these steps, you can ensure your key fob remains functional and reliable. Always use the recommended CR2032 battery for the best results.