Introduction
Replacing the battery in your Buick Allure key fob is a simple task. You don’t need any special tools or experience. In this guide, I’ll walk you through the process step-by-step.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What You Need
- Flathead screwdriver
- CR2032 battery
You can purchase the CR2032 battery online. Here is a link to buy the battery on Amazon.
Step-by-Step Guide
Locate the Slot
First, look at the bottom of your key fob. You’ll see a seam with a small slot in the plastic. This is where you’ll insert your flathead screwdriver.
Open the Key Fob
Insert your flathead screwdriver into the slot. Push it in gently, then twist the screwdriver. You’ll feel the key fob crack open a bit.
Continue twisting until the key fob comes apart easily. You can also work your way around the seam if needed.
Remove the Circuit Board
When you open the key fob, the circuit board may fall out. This is normal. Set the circuit board aside for now.
Remove the Old Battery
Locate the battery on the other side of the key fob. Slide the battery out using your thumb. Dispose of the old battery properly.
Insert the New Battery
Take your new CR2032 battery. Make sure the positive side is facing up. You should see the text and plus sign on the battery.
Push the battery down into place.
Reassemble the Key Fob
Pick up the circuit board and locate the rubber component inside the key fob. Place the circuit board battery side up into the rubber component.
Click the key fob back together. Ensure it’s securely closed.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
You’ve successfully replaced the battery in your Buick Allure key fob. If you found this guide helpful, feel free to let me know in the comments or give this a like.
If you need help with other key fobs, check out our other videos or visit our website at fobbattery.com.
Frequently Asked Questions
What tools do I need?
You only need a flathead screwdriver and a CR2032 battery.
Where can I buy the battery?
You can purchase the CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Is it difficult to open the key fob?
Not at all. Just insert the screwdriver into the slot and twist gently.
What if the circuit board falls out?
That’s normal. Just set it aside and reinsert it later.
How do I know if the battery is inserted correctly?
Make sure the positive side is facing up. You should see the text and plus sign.
Can I use a different type of battery?
No, you should use a CR2032 battery for the Buick Allure key fob.
How do I reassemble the key fob?
Place the circuit board battery side up into the rubber component. Click the key fob back together.
Where can I find more information?
Visit our website at fobbattery.com for more guides and information.