How to Replace the Battery in a Buick Cascada Key Fob (2016 – 2019)

Introduction

Replacing the battery in your Buick Cascada key fob is a straightforward process that doesn’t require any special tools. In this guide, I will walk you through the steps to replace the CR2032 coin battery.

Whether your key fob has three or five buttons, the procedure remains the same. Follow these easy steps to get your key fob working like new.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Materials Needed

Before we begin, make sure you have the following materials:

  • CR2032 coin battery

You can purchase a CR2032 battery from Amazon for just a few dollars.

Step-by-Step Instructions

Flip Out the Internal Key

The first step is to flip out the internal key from your key fob. This will give you access to the compartment that holds the battery.

Remove the Back Piece of Plastic

Turn the key fob over so that you are looking at the compartment where the key was. You’ll see a small lip inside this compartment.

Push up on this lip using your thumb. Hold the top part of the key fob, which will have a Buick symbol on it. The back piece of plastic will come off easily.

Access the Battery

Now that the back piece of plastic is removed, you will have access to the battery. There is a small piece of plastic holding the battery in place.

Touch next to this piece of plastic to pop the battery out. Dispose of the old battery properly.

Insert the New Battery

Take your new CR2032 battery and make sure the positive side is facing up. Slide it under the piece of plastic until it sits flush in the compartment.

Reassemble the Key Fob

Once the new battery is in place, click the back piece of plastic back onto the key fob. Make sure it is securely attached.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Final Thoughts

Replacing the battery in your Buick Cascada key fob is a simple task that can be done in just a few minutes. By following these steps, you can ensure your key fob is functioning properly.

If you found this guide helpful, feel free to let me know in the comments. For more information on key fob batteries and other devices, visit fobbattery.com.

FAQ

What type of battery does the Buick Cascada key fob use?

The Buick Cascada key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

No, you do not need any special tools to replace the battery in your Buick Cascada key fob.

How often should I replace the battery in my key fob?

It is recommended to replace the battery every 1-2 years or when the key fob starts to lose its range.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center or a store that accepts used batteries.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

For more tips and guides on key fob maintenance, visit our website fobbattery.com.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.