How to Replace the Battery in a Cadillac Escalade Key Fob (2007-2014)

Introduction

Replacing the battery in your Cadillac Escalade key fob is a straightforward task that you can do at home. This guide will walk you through the process step-by-step. Whether you have the version with six buttons or another variant, the battery replacement procedure remains the same.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

What You Will Need

  • CR2032 battery
  • Flathead screwdriver

These items are inexpensive and easily available. You can find CR2032 batteries online or in most electronics stores.

Step-by-Step Guide

Step 1: Remove the Internal Key

First, hold down the button on the face of the key fob. While holding it down, pull out the internal key and set it aside. This will give you access to the keyhole, which is essential for the next steps.

Step 2: Open the Key Fob

Take your flathead screwdriver and hold the key fob with the back facing up. Insert the screwdriver into the keyhole and apply slight pressure until you hear a cracking sound. This indicates that the corner has started to open up.

Continue to twist the screwdriver gently along the edge, working your way down the side of the key fob. This will help you avoid any potential damage to the device. Once the side is completely open, fold it open like a book.

Step 3: Remove the Old Battery

With the key fob open, locate the battery. There is a small opening in the corner where you can insert the flathead screwdriver to pry the battery up. The battery will come out attached to a metal component. Push the battery out of this metal piece and set the component aside.

Dispose of the old battery properly. It is essential to handle old batteries with care to avoid any environmental harm.

Step 4: Insert the New Battery

Take your new CR2032 battery and insert it into the metal component you set aside earlier. Make sure the positive side is facing down. You will know it is in the correct position when you see the text through the little ring on the metal component.

Once the battery is secure in the metal component, drop it into its housing in the key fob. Ensure that the part of the battery that sticks out lines up with the corresponding part in the housing. Squeeze the battery and housing together until it sits flush and does not fall out.

Step 5: Reassemble the Key Fob

Now that the new battery is in place, close the key fob by clicking the two pieces back together. Ensure everything is secure and properly aligned. Finally, reinsert the internal key into the key fob.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

And there you have it! You have successfully replaced the battery in your Cadillac Escalade key fob. This simple task can save you time and money compared to visiting a dealership. If you found this guide helpful, feel free to share your experience in the comments section or give this guide a like.

If you need assistance with other key fobs, check out our other guides on YouTube or visit our website at fobbattery.com. We cover a wide range of devices from various makes and models.

Frequently Asked Questions (FAQ)

What type of battery does a Cadillac Escalade key fob use?

The Cadillac Escalade key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

No, you only need a flathead screwdriver to open the key fob and replace the battery.

Can I use a different type of battery?

No, the key fob is designed to use a CR2032 battery. Using a different type may cause it to malfunction.

How often should I replace the battery in my key fob?

Battery life can vary, but it is generally a good idea to replace it every 1-2 years or when you notice reduced functionality.

Is it safe to replace the battery myself?

Yes, replacing the battery yourself is safe and straightforward if you follow the steps correctly.

What should I do with the old battery?

Dispose of the old battery properly. Many electronics stores have recycling programs for used batteries.

What if my key fob still doesn’t work after replacing the battery?

If your key fob still doesn’t work, ensure the battery is correctly installed. If it is, you may need to consult a professional for further assistance.

Where can I buy a CR2032 battery?

You can purchase CR2032 batteries online or at most electronics stores. We recommend buying them from Amazon for convenience.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.