How to Replace the Battery in a Dodge Viper Key Fob (2015 – 2017)

Introduction

In this guide, I will walk you through the process of changing the internal battery on your Dodge Viper key fob. Whether you have the black or red version of the key fob, the procedure is the same. Follow along, and you’ll have a new battery in no time. This key fob was used between 2015 and 2017 and requires a CR2032 battery. You can easily find these batteries online. Let’s get started!

What You’ll Need

• CR2032 battery
• Flathead screwdriver

Step-by-Step Instructions

Remove the Internal Key

First, turn the key fob over. Hold down the little switch on the back to remove the internal key. Set the key aside for now.

Open the Key Fob

Now, you’ll see a keyhole and a small slot above it. Insert a flathead screwdriver into this slot and twist gently. Hold the device firmly and twist until you feel it open up slightly. You’ll see a small crack down the side.

Access the Battery

Work your way down the opening, twisting the screwdriver until you have full access to the battery. Use your fingernail or the flathead screwdriver to gently lift the battery out.

Replace the Battery

Take the new CR2032 battery and make sure the positive side is facing down. Click it back into place. Apply pressure until the seam is completely closed.

Reassemble the Key Fob

Don’t forget to put the internal key back in. And that’s it! Your key fob is now ready to go.

Frequently Asked Questions (FAQ)

What if my key fob looks different?

The procedure is the same for both black and red versions of the key fob. Even if your key fob has a different number of buttons, the process remains unchanged.

Where can I buy a CR2032 battery?

You can find CR2032 batteries online, often for just a couple of bucks.

Do I need any special tools?

No special tools are required. All you need is a flathead screwdriver to open the key fob.

How often should I replace the battery?

It’s a good idea to replace the battery every couple of years or when you notice a decrease in the key fob’s range or performance.

Can I use a different type of battery?

No, you should use a CR2032 battery as it is specifically designed for this key fob.

Is it easy to damage the key fob?

As long as you follow the instructions and use gentle pressure, you should be able to replace the battery without any issues.

What if my key fob still doesn’t work?

If your key fob isn’t working after replacing the battery, it may be a different issue. Consider consulting a professional or checking for other problems.

Conclusion

Replacing the battery in your Dodge Viper key fob is a simple process that takes just a few minutes. With a new CR2032 battery and a flathead screwdriver, you can easily extend the life of your key fob. If you found this guide helpful, feel free to leave a comment or like. For more information on key fob battery replacements for various makes and models, check out our other videos or visit our website.

Thank you for reading, and happy driving!