Introduction
Replacing the battery in your Ford C-Max Smart Key Fob can seem like a daunting task. However, with a few simple steps, you can easily do it yourself. This guide will walk you through the process, ensuring that your key fob is back in working order in no time.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gather Your Tools
Before you begin, make sure you have everything you need. You will require a new CR2032 coin battery and a small tool to help you pry open the key fob. An extra key or a small flathead screwdriver works well for this purpose.
Locate the Notch
The first step in replacing the battery is to locate the small notch on the key fob. This notch is crucial as it allows you to pry open the key fob. You can find it in the corner of the key fob.
Getting Leverage
Once you’ve found the notch, you need to get some leverage to open the key fob. Using another key or a small flathead screwdriver, insert it into the notch and twist gently. This action should pop the two sides of the key fob apart.
Remove the Backing
After you have successfully separated the two halves of the key fob, you will see a small backing that covers the battery. Remove this backing carefully and set it aside for now.
Access the Battery
With the backing removed, you will have access to the CR2032 battery. This battery should fall out easily once the backing is off. If it doesn’t, gently tap the key fob to dislodge it.
Insert the New Battery
Take your new CR2032 battery and make sure the positive side, which has the lettering, is facing towards you. Place the battery into the key fob, ensuring it is seated properly.
Replace the Backing
Once the new battery is in place, take the backing you set aside earlier and place it back over the battery. Make sure it is aligned correctly before pressing the two halves of the key fob back together.
Test the Key Fob
After reassembling the key fob, test it to make sure it is working correctly. If it doesn’t work, you may need to reopen it and check that the battery is seated properly.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tips and Tricks
- Use another key for leverage
- Be gentle when prying open
- Ensure the battery is seated correctly
Conclusion
Replacing the battery in your Ford C-Max Smart Key Fob is a simple task that can be done at home. By following these steps, you can save time and money. If you need to purchase a new CR2032 battery, you can find it on Amazon.com.
FAQ
What type of battery does the Ford C-Max key fob use?
The Ford C-Max key fob uses a CR2032 coin battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Is it difficult to replace the battery in the key fob?
No, replacing the battery is straightforward if you follow the steps outlined in this guide.
What should I do if the key fob doesn’t work after replacing the battery?
Double-check that the battery is seated correctly and that the key fob is properly reassembled.
Can I use any tool to pry open the key fob?
It’s best to use a small tool like another key or a flathead screwdriver to avoid damaging the key fob.
Additional Resources
For more information on the Ford C-Max and other vehicles, visit the Fob Battery website.