Introduction
Welcome! If you own a Ford F-250 from 2017 to 2019, you might find yourself needing to replace the battery in your key fob. This guide will walk you through the process step-by-step. It’s simpler than you might think, and by the end, you’ll have a fully functional key fob again.
- Pack of 2 batteries
- Lithium coin batteries for watches and electronic devices
- Has a power of 3 volts
Tools You’ll Need
Before we get started, let’s gather the necessary tools. Fortunately, you won’t need much:
- Flathead screwdriver
- CR2450 coin battery
- Paperclip (optional)
If you don’t have a CR2450 coin battery, you can easily purchase one from Amazon.com.
Step 1: Remove the Internal Valet Key
The first step in replacing your key fob battery is to remove the internal valet key. This key is hidden within the fob and is crucial for accessing the battery compartment.
To remove it:
- Locate the button on the front side of the fob.
- Press the button to release the valet key.
- Pull the valet key out.
With the valet key removed, you’re ready to move on to the next step.
Step 2: Open the Battery Compartment
Next, you’ll need to open the battery compartment. This is where the flathead screwdriver comes in handy.
To open the compartment:
- Flip the fob over to reveal the back.
- Locate the slots on the sides of the fob.
- Insert the flathead screwdriver or valet key into the slots.
- Apply a little pressure to pop off the back cover.
Once the back cover is removed, you’ll have access to the battery.
Step 3: Remove the Old Battery
With the battery compartment open, the next step is to remove the old battery. This is a straightforward process.
To remove the battery:
- Locate the small hole near the battery.
- Use a paperclip or small flathead screwdriver to pop the battery out.
- Dispose of the old battery properly.
Now, you’re ready to install the new battery.
Step 4: Install the New Battery
Installing the new battery is just as simple as removing the old one. Ensure you have the correct battery type: a CR2450 coin battery.
To install the new battery:
- Orient the battery so the positive side faces you.
- Place the battery into the compartment.
- Ensure it is securely in place.
With the new battery installed, you’re almost done!
Step 5: Reassemble the Key Fob
The final step is to reassemble your key fob. This involves putting the back cover and valet key back into place.
To reassemble:
- Align the notch on the back cover with the base of the fob.
- Press the cover back into place.
- Insert the valet key back into its slot.
And just like that, your key fob is as good as new!
- Pack of 2 batteries
- Lithium coin batteries for watches and electronic devices
- Has a power of 3 volts
FAQs
What type of battery does the Ford F-250 key fob use?
The Ford F-250 key fob uses a CR2450 coin battery.
Do I need any special tools to replace the battery?
No, you only need a flathead screwdriver and possibly a paperclip.
How often should I replace the key fob battery?
Typically, the battery should be replaced every 1-2 years, depending on usage.
Can I use a different type of battery?
No, it’s recommended to use the specified CR2450 battery for optimal performance.
Where can I buy a CR2450 battery?
You can purchase a CR2450 battery from Amazon.
- Pack of 2 batteries
- Lithium coin batteries for watches and electronic devices
- Has a power of 3 volts
Conclusion
Replacing the battery in your Ford F-250 key fob is a simple task that can save you time and money. With just a few tools and a new CR2450 battery, you can have your key fob working like new in no time. If you found this guide helpful, consider sharing it with other Ford F-250 owners who might benefit from it.