How to Replace the Battery in a Ford F-350 Super Duty Remote Key Fob

Introduction

Replacing the battery in your Ford F-350 Super Duty remote key fob is a straightforward process. This guide will walk you through the steps needed to replace the battery in models from 2011 to 2016.

If your key fob looks like the one described here, this guide is for you. Let’s dive into the details.

Tools Needed

Before you begin, gather the necessary tools. You don’t need much, but having the right tools will make the process smoother.

• Flathead screwdriver
• Replacement battery (CR2032)
• Another key (optional)

Step-by-Step Instructions

Follow these steps to replace the battery in your key fob. Each step is crucial to ensure the key fob works correctly after the battery replacement.

Step 1: Locate the Notch

First, identify the small notch in the upper right corner of the key fob. This notch is where you will insert your tool to open the fob.

Step 2: Insert the Tool

Use a flathead screwdriver or another key to insert into the notch. Apply gentle pressure to create separation between the two pieces of the fob.

Step 3: Twist and Separate

Once the tool is inserted, twist it to pry the key fob open. You should see the two halves start to separate.

Continue to twist and gently pull the two pieces apart. Be cautious not to damage any components inside.

Step 4: Remove the Rubber Holder

Inside the fob, you may find a small rubber holder. This holder can either stay attached to the back or come off with the front. Remove it carefully and set it aside.

Step 5: Remove the Old Battery

Locate the old battery inside the fob. It should be a CR2032 3-volt coin battery. Flip the fob over and gently tap it to release the battery.

Step 6: Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing up. Place it into the battery compartment. It should fit snugly.

Step 7: Reassemble the Key Fob

Place the rubber holder back in its original position if it was removed. Align the two halves of the key fob and press them together until they snap into place.

Testing the Key Fob

After reassembling the key fob, it’s essential to test it. Ensure all buttons work correctly and that the fob communicates with your vehicle.

If the key fob doesn’t work, double-check the battery orientation and ensure the fob is properly assembled.

Maintaining Your Key Fob

Regular maintenance of your key fob can extend its lifespan. Here are some tips to keep it in good condition:

• Avoid dropping it
• Keep it dry
• Replace the battery annually

Frequently Asked Questions (FAQ)

What type of battery does the Ford F-350 key fob use?

The Ford F-350 key fob uses a CR2032 3-volt coin battery.

How often should I replace the key fob battery?

It’s recommended to replace the battery annually or whenever the key fob starts to lose range or responsiveness.

Can I use a different type of battery?

No, you should use the specified CR2032 battery to ensure proper function.

What if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, check the battery orientation and ensure the fob is correctly assembled. If it still doesn’t work, there may be a deeper issue requiring professional attention.

Where can I buy a replacement battery?

You can purchase a replacement battery on Amazon.

Conclusion

Replacing the battery in your Ford F-350 Super Duty remote key fob is a simple task that can save you time and money. With just a few tools and steps, your key fob will be as good as new.

Remember to handle the key fob with care during the process to avoid any damage. Regular maintenance can help keep your key fob functioning correctly for years to come.

If you need further assistance or new batteries, check out this guide for more information.