Introduction
Replacing the battery in your Hyundai Genesis Coupe key fob is a simple task that can be done at home. This guide will walk you through the process step by step. By following these instructions, you can save time and money by avoiding a trip to the dealership.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you start, make sure you have the necessary tools and materials. Here’s what you’ll need:
- CR2032 battery
- Flathead screwdriver
You can purchase the CR2032 battery on Amazon. It’s affordable and readily available.
Step-by-Step Guide
Follow these steps to replace the battery in your Hyundai Genesis Coupe key fob:
Step 1: Open the Key Fob
Locate the slot on the top of the key fob. Insert a flathead screwdriver into this slot and twist it gently. The two halves of the key fob will begin to separate. You can then pull them apart with your fingers.
Step 2: Remove the Old Battery
Once you have opened the key fob, you will see the CR2032 battery housed in a plastic and metal area. Use the flathead screwdriver to push on the bottom lip of the battery just enough to pull it out with your fingers.
Step 3: Insert the New Battery
Take a brand new CR2032 battery and make sure the positive side, which has the text and information, is facing up. Slide it back into the slot until it is firmly in place.
Step 4: Reassemble the Key Fob
Now that the new battery is in place, it’s time to reassemble the key fob. First, put the buttons back in. The first two buttons are connected and easy to line up. Then, place the hatch button (the hold button) back into its slot. Ensure everything is flush.
Next, place the circuit board and the battery on top of the buttons. Gently push down and click the two halves of the key fob back together. Your key fob should now be working, as indicated by the light turning on.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tips and Tricks
Here are some additional tips to ensure a smooth battery replacement:
- Work on a clean, flat surface to avoid losing any small parts.
- Keep the parts organized and in order to make reassembly easier.
- If the key fob doesn’t work after replacing the battery, double-check that the battery is installed correctly with the positive side facing up.
Why Replace the Battery Yourself?
There are several benefits to replacing the battery in your key fob yourself:
- Save money: Avoid dealership fees.
- Convenience: No need to schedule an appointment.
- Quick fix: The process takes only a few minutes.
Frequently Asked Questions (FAQ)
What type of battery does the Hyundai Genesis Coupe key fob use?
The Hyundai Genesis Coupe key fob uses a CR2032 battery.
Where can I buy a CR2032 battery?
You can buy a CR2032 battery on Amazon or at most electronic stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace the key fob battery?
The key fob battery typically lasts 2-3 years, but it can vary depending on usage.
Can I use a different type of battery?
No, it’s recommended to use the CR2032 battery as specified by the manufacturer.
What should I do if the key fob doesn’t work after replacing the battery?
If the key fob doesn’t work after replacing the battery, ensure that the battery is installed correctly with the positive side facing up. If it still doesn’t work, the key fob might be damaged and may need professional repair.
Conclusion
Replacing the battery in your Hyundai Genesis Coupe key fob is a straightforward task that you can do at home. By following this guide, you can ensure that your key fob continues to work properly without the need for costly dealership services. For more detailed guides and information, visit fobbattery.com.