Introduction
Replacing the battery in your Hyundai Veloster key fob is a simple task that you can do at home. This guide will walk you through the steps to change the battery in the three-button key fob used on models from 2012 to 2017. You’ll need a CR2032 battery and a flat-head screwdriver.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
- Flat-head screwdriver
- CR2032 battery
You can purchase the CR2032 battery online for just a few dollars. It will be delivered to your door, making it convenient to follow along with this guide.
Step-by-Step Instructions
1. Open the Key Fob
First, locate the slot on the top of the key fob. Insert your flat-head screwdriver into this slot. Gently twist the screwdriver until you see a separation between the two halves of the key fob.
You can either pull the key fob apart with your fingers or continue twisting the screwdriver along the opening until the whole thing comes apart. Be mindful to keep the back facing up when you open it to avoid misplacing any components.
2. Remove the Old Battery
If you accidentally open the key fob the wrong way and parts fall out, don’t worry. Ensure the circuit board is in the rubber housing. Use your flat-head screwdriver or even your finger to gently push on the bottom of the old battery until you can remove it with your fingers.
3. Insert the New Battery
Take your new CR2032 battery and make sure the positive side, which has the battery information, is facing up. Slide it under the piece of metal until it goes all the way into place.
4. Reassemble the Key Fob
Now, let’s put the buttons back in their place. Start with the two connected buttons and position them at the top. Next, place the trunk open button in its designated spot, making sure the correct side is facing up.
Once the buttons are in place, gently put the rubber piece with the circuit board on top of the buttons. Click the two halves of the key fob back together. You’ll know you’ve done it correctly if the buttons work and the light comes on, indicating that the new battery has juice.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And that’s it! You’ve successfully replaced the battery in your Hyundai Veloster key fob. If you found this guide helpful, visit other full guide on FobBattery.com.
FAQ
What type of battery does the Hyundai Veloster key fob use?
The Hyundai Veloster key fob uses a CR2032 battery.
Do I need any special tools to replace the battery?
You’ll only need a flat-head screwdriver to open the key fob.
How can I tell if I’ve installed the battery correctly?
If the buttons work and the light comes on, you’ve installed the battery correctly.
What should I do if the key fob parts fall out during the process?
Ensure the circuit board is in the rubber housing and reassemble the key fob following the steps provided.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online from retailers like Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032