Introduction to Key Fob Battery Replacement
Replacing the battery in your Jeep Compass key fob is a straightforward process. Whether your key fob has stopped working or you just want to ensure it doesn’t fail unexpectedly, this guide will help you through the steps. You’ll need a CR2032 coin battery, which is easily available online.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gathering Your Tools and Supplies
Before starting, make sure you have everything you need. The tools are minimal, and you can find the necessary CR2032 battery at Amazon.com.
- CR2032 coin battery
- Flathead screwdriver or coin
Removing the Internal Key
The first step is to remove the internal key from the key fob. This allows access to the battery compartment.
- Locate the small lever on the key fob.
- Pull the lever while holding the key fob.
- Remove the internal key.
Opening the Key Fob
Once you’ve removed the internal key, you can open the key fob to access the battery compartment.
- Identify the keyhole and the small area next to it.
- Insert a flathead screwdriver or a coin into this area.
- Twist gently to separate the two halves of the key fob.
Removing the Old Battery
With the key fob open, you can now remove the old battery.
- Set the two halves of the key fob aside.
- Gently pry out the old battery.
Inserting the New Battery
Next, insert the new CR2032 battery into the key fob.
- Ensure the positive side of the battery faces down.
- Push the battery towards the metal component first.
- Click the battery into place.
Reassembling the Key Fob
After inserting the new battery, you need to reassemble the key fob.
- Align the two halves of the key fob.
- Push them together until there is no more space between them.
Final Steps
Finally, reinsert the internal key and ensure everything is working correctly.
- Insert the internal key back into the key fob.
- Test the key fob to ensure it is functioning properly.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion and Additional Resources
Replacing the battery in your Jeep Compass key fob is a simple task that you can do at home. If you found this guide helpful, you can find more guides for other makes and models at fobbattery.com or leave a comment or like on the video.
Frequently Asked Questions (FAQ)
What type of battery does the Jeep Compass key fob use?
The Jeep Compass key fob uses a CR2032 coin battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon or at most electronics stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace the key fob battery?
It’s recommended to replace the battery every 1-2 years or when you notice decreased functionality.
Can I use a different type of battery?
No, you should only use a CR2032 battery to ensure proper function.
Is it difficult to open the key fob?
Opening the key fob requires a bit of effort but is not difficult if done carefully.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, check the battery’s orientation and ensure it is properly seated. If it still doesn’t work, there may be a different issue requiring professional assistance.