Introduction
Replacing the battery in your Subaru Baja key fob is a simple process that you can do at home. If you own a Baja from 2003 to 2006, this guide is for you. In this post, I’ll walk you through the steps to replace your key fob battery quickly and easily.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What You Will Need
Before you start, make sure you have the necessary tools. You will need a CR2032 coin battery and a small Phillips head screwdriver. If you don’t have these tools, you can easily find them online or around your house.
- CR2032 coin battery
- Small Phillips head screwdriver
Step-by-Step Instructions
Step 1: Remove the Screws
First, locate the screws on the back of your key fob. Use your Phillips head screwdriver to remove these screws. Be careful not to lose them; set them aside in a safe place.
Step 2: Open the Key Fob
Once the screws are removed, gently lift off the back cover of the key fob. Set the cover aside. Inside, you’ll see the CR2032 battery that needs to be replaced.
Step 3: Remove the Old Battery
To remove the old battery, use your thumb or finger to push it out of its slot. Be cautious not to damage any components inside the key fob. Take your time with this step.
Step 4: Insert the New Battery
Take your new CR2032 coin battery. Ensure the positive side, which has the battery information and text, is facing up. Slide the new battery into place, making sure it fits snugly.
Step 5: Reassemble the Key Fob
Place the back cover of the key fob back onto the device. Reinsert the screws and tighten them. Don’t over-tighten; just make sure the cover is secure.
Step 6: Test the Key Fob
Finally, test your key fob to ensure it is working correctly. Press a button to see if the light comes on. If it does, you’ve successfully replaced the battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
FAQ
What type of battery do I need?
You will need a CR2032 coin battery for your Subaru Baja key fob.
Where can I buy the battery and screwdriver?
You can purchase the CR2032 battery and the precision screwdrivers on Amazon or at a local hardware store.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How do I know if my key fob battery is dead?
If your key fob is not responding or the light does not come on when you press a button, the battery is likely dead and needs replacement.
Can I use any coin battery?
No, you should use a CR2032 coin battery. Other types may not fit or work properly.
How often should I replace my key fob battery?
Key fob batteries typically last 1-2 years. Replace it as soon as you notice a decrease in performance.
What if my key fob still doesn’t work after replacing the battery?
If your key fob still doesn’t work after replacing the battery, there may be another issue. Consult your vehicle’s manual or contact a professional for further assistance.
Conclusion
Replacing the battery in your Subaru Baja key fob is a straightforward task that you can do in just a few minutes. With a new CR2032 coin battery and a Phillips head screwdriver, you’ll have your key fob working like new. Remember to handle the components carefully and test the key fob before concluding the process. For more guides and tips, visit our website or check out our other videos.