Introduction
Replacing the battery in your Volkswagen GTI key fob is a simple task that you can easily do at home. This guide will walk you through the steps needed to replace the battery, ensuring your key fob functions perfectly. You’ll only need a few common tools and a new battery.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Tools and Materials Needed
Before starting the replacement process, gather the following tools and materials:
- Flathead screwdriver
- CR2025 battery
You can easily find a CR2025 battery online at a reasonable price. I’ve included a link to purchase it from Amazon in the description.
Step 1: Flip Out the Key
The first step is to flip out the key, which will give you access to the area where the battery is housed. This is a straightforward process that doesn’t require any special tools. Simply flip the key out as you normally would when preparing to use it.
Step 2: Pry Off the Back Cover
Next, you’ll need to remove the back cover of the key fob. For this, you can use a flathead screwdriver or any other tool that fits into the indentation. Insert the tool and gently pry off the back cover. Hold the key fob securely to ensure you don’t damage it during this process.
It’s important to note that the tool doesn’t necessarily have to be a flathead screwdriver. Anything that can fit into the indentation and allow you to pry off the cover will work. Be gentle to avoid breaking the plastic.
Step 3: Remove the Old Battery
Once the back cover is removed, you’ll see the old battery. Use a small flathead screwdriver or a similar tool to pry out the battery from its compartment. Other tools like a thick paper clip or a bobby pin can also work for this task.
Slide the tool under the battery and gently lift it out. Be careful not to damage the surrounding components. If you’re using a larger flathead screwdriver, use the corner of the tool to lift the battery, but proceed with caution as it can be a bit tricky.
Step 4: Insert the New Battery
Now that the old battery is removed, it’s time to insert the new CR2025 battery. Make sure the positive side (marked with a plus sign) is facing up. This is crucial for the proper functioning of the key fob.
Slide the new battery under the plastic tab first, and then click the other side into place. Ensure the battery sits flat and securely in the compartment.
Step 5: Reattach the Back Cover
With the new battery in place, you can now reattach the back cover. Insert the tabs on the cover into the corresponding slots on the key fob. Once the tabs are in place, snap the cover shut like closing a book.
Ensure the cover is properly aligned and securely attached. If one of the tabs isn’t in the right place, you may need to remove the cover and try again. Double-check that everything is properly secured before proceeding.
Step 6: Test the Key Fob
To ensure you’ve replaced the battery correctly, test the key fob by pressing one of the buttons. If the light on the key fob comes on, it means the battery is installed correctly and has power.
If the light doesn’t come on, you may need to reopen the key fob and check the battery’s orientation. Make sure the positive side is facing up and the battery is properly seated in its compartment.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Conclusion
Replacing the battery in your Volkswagen GTI key fob is a quick and easy process that can save you time and money. By following these simple steps, you can ensure your key fob continues to function properly. If you found this guide helpful, feel free to let me know in the comments or give this post a like.
If you need help with other key fobs, check out our website, fobbattery.com, for more tutorials and information on key fob batteries for various car models.
Frequently Asked Questions (FAQ)
What tools do I need to replace the battery?
You’ll need a flathead screwdriver and a CR2025 battery.
How long does it take to replace the battery?
The entire process takes under five minutes.
Can I use other tools instead of a flathead screwdriver?
Yes, you can use any tool that fits into the indentation to pry off the cover.
Where can I buy a CR2025 battery?
CR2025 batteries are available online. You can find them on Amazon.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
What should I do if the key fob doesn’t work after replacing the battery?
Check the battery’s orientation and ensure the positive side is facing up.
Is it necessary to test the key fob after replacing the battery?
Yes, testing ensures the battery is installed correctly and has power.
Can I find tutorials for other key fobs on your website?
Yes, visit fobbattery.com for tutorials and information on various key fobs.