How to Replace the Battery in a Volvo S60 Key Fob (2001 – 2003)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Volvo S60 key fob is a straightforward process. It only takes a few minutes and requires minimal tools. In this guide, I’ll walk you through the steps to replace the battery yourself.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before you start, make sure you have everything you need:

  • CR2032 battery
  • Torx head screwdriver (size 8)

You can purchase the CR2032 battery from Amazon.com at an affordable price.

Step-by-Step Guide

Let’s dive into the process of replacing your key fob battery.

Step 1: Remove the Torx Screw

First, locate the star-shaped screw on the back of the key fob. This is a Torx head screw, specifically a size 8. Use your Torx head screwdriver to remove this screw.

Step 2: Open the Key Fob

Once the screw is removed, carefully open the key fob. However, don’t snap it all the way open. There are two plastic tabs holding it together. Push up gently to slide it off these tabs.

Step 3: Remove the Old Battery

With the key fob open, you’ll see the old battery. Use your fingernail or a flathead screwdriver to gently lift the battery out of its compartment.

Step 4: Insert the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing down. Snap it into place securely.

Step 5: Reassemble the Key Fob

Now, align the plastic tabs and slide the key fob back together. Once aligned, squeeze it gently to snap it back into place. Finally, reinsert the Torx screw and tighten it securely.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Final Thoughts

Replacing your key fob battery is a simple task that can save you both time and money. With a new battery, your key fob should be good to go for a long time.

If you found this guide helpful, feel free to let me know in the comments or by giving this post a like. For more information and guides on key fob batteries, visit FobBattery.

FAQs

What type of battery does the Volvo S60 key fob use?

The Volvo S60 key fob uses a CR2032 coin battery.

Where can I buy the CR2032 battery?

You can purchase the CR2032 battery from Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Do I need any special tools to replace the battery?

You will need a Torx head screwdriver, size 8, to replace the battery.

Can I use any other type of battery?

No, it’s important to use the CR2032 battery to ensure compatibility and proper function.

How long will the new battery last?

A new CR2032 battery can last for several years, depending on usage.

Is it difficult to open the key fob?

No, opening the key fob is simple. Just ensure you gently slide it off the plastic tabs to avoid damage.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center or following local disposal regulations.

Where can I find more guides on key fob batteries?

For more guides, visit FobBattery.

Conclusion

Changing the battery in your Volvo S60 key fob is a simple and quick task. With this guide, you can do it yourself at home and save time and money. Remember to visit FobBattery for more information and guides on key fob batteries.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.