How to Replace the Battery in an Acura TLX Key Fob (2015-2020)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Acura TLX key fob is a simple task that you can do yourself. This guide will walk you through the steps to ensure your key fob is functioning correctly. The process requires minimal tools and can be completed in a matter of minutes.

Tools and Materials Needed

Before you start, make sure you have the necessary tools and materials. You will need:

• CR2032 coin battery
• Flat-head screwdriver

You can easily purchase these items online. For convenience, you can find the CR2032 coin battery on Amazon.

Step-by-Step Guide

Follow these steps to replace the battery in your Acura TLX key fob:

Remove the Internal Key

The first step is to remove the internal key from the key fob. Flip the key fob over and locate the small lever. Push the lever up while holding it, and then remove the internal key.

Open the Key Fob

Next, you need to open the key fob. Flip the key fob to the back and find the space between the metal keyring and the edge of the back cover. Insert the flat-head screwdriver into this space.

Push the screwdriver down until it feels secure. Once it’s in place, twist the screwdriver gently but firmly until you hear a pop. This action will create an opening in the key fob.

Separate the Key Fob Halves

With the initial opening made, insert the screwdriver further into the gap. Twist it all the way down to separate the two halves of the key fob completely.

Remove the Old Battery

Now that the key fob is open, you can remove the old battery. Use the corner of the flat-head screwdriver to get under the battery. Gently twist the screwdriver to pop the battery out.

Insert the New Battery

Take the new CR2032 battery and ensure the positive side with the text is facing up. Position the battery into place and click it down securely.

Reassemble the Key Fob

After the new battery is in place, reassemble the key fob. Align the two halves and click them back together. Finally, insert the internal key back into the fob.

Testing the Key Fob

Once you have reassembled the key fob, it’s time to test it. Press any button on the key fob to see if the light comes on. If it does, the battery replacement was successful.

Additional Tips

Here are a few additional tips to keep in mind when replacing the key fob battery:

• Work on a clean, flat surface.
• Handle the battery with care.
• Dispose of the old battery properly.

Common Issues and Solutions

If you encounter any issues during the battery replacement process, consider the following solutions:

• Key fob doesn’t open: Ensure the screwdriver is secure before twisting.
• Battery doesn’t fit: Double-check the battery orientation.
• Key fob doesn’t work: Confirm the battery is properly seated.

FAQ

What type of battery does the Acura TLX key fob use?

The Acura TLX key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

It’s recommended to replace the key fob battery every 1-2 years, or when it starts to show signs of low power.

Can I use any flat-head screwdriver?

Yes, any flat-head screwdriver that fits into the space can be used.

What should I do if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, double-check the battery orientation and ensure it’s properly seated. If the problem persists, consult a professional.

Where can I buy a CR2032 coin battery?

You can purchase a CR2032 coin battery from various online retailers, including Amazon.

Conclusion

Replacing the battery in your Acura TLX key fob is a straightforward process that can save you time and money. With just a few tools and this step-by-step guide, you can ensure your key fob is always functioning at its best.

For more detailed guides on key fob maintenance, visit Fob Battery.