Introduction to Key Fob Battery Replacement
Replacing the battery in your BMW X5 key fob is a straightforward process that can save you time and money. This guide will walk you through the steps needed to replace the battery for models from 2014 to 2018, specifically the F15 model.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gather Your Tools
Before you begin, make sure you have the necessary tools. You will need:
- CR2032 battery
- Small flat-head screwdriver
You can easily purchase a CR2032 online.
Step 1: Remove the Valet Key
The first step in replacing the battery is to remove the valet key from the key fob. To do this:
- Press the small button on the long side of the key fob.
- Pull the valet key out.
Step 2: Open the Key Fob
Next, you’ll need to open the key fob to access the battery. Here’s how:
- Flip the key fob over.
- Locate the small hole next to where the valet key was.
- Insert the flat-head screwdriver into the hole.
- Gently leverage the back cover off.
The cover should pop off easily with minimal effort.
Step 3: Remove the Old Battery
With the back cover removed, you will see the internal CR2032 battery. To remove it:
- Locate the two prongs holding the battery in place.
- Gently lift the battery from the prongs.
Be careful not to damage the springs inside the key fob.
Step 4: Insert the New Battery
Now it’s time to insert the new battery. Follow these steps:
- Place the bottom of the new CR2032 battery into the slot first.
- Push the top of the battery into place, ensuring it snaps under the prongs.
Step 5: Reassemble the Key Fob
With the new battery in place, you can now reassemble the key fob:
- Align the slanted part of the back cover with the key fob.
- Press the cover back into place until it snaps securely.
- Reinsert the valet key.
Congratulations, you’ve successfully replaced the battery in your BMW X5 key fob!
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
FAQs About BMW X5 Key Fob Battery Replacement
This section answers some common questions about replacing the battery in your BMW X5 key fob.
What type of battery does the BMW X5 key fob use?
The BMW X5 key fob uses a CR2032 3-volt battery. You can purchase it from Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace the key fob battery?
Typically, a key fob battery lasts about 2-3 years. If your key fob isn’t working properly, it might be time for a battery replacement.
Can I use any CR2032 battery for my key fob?
Yes, any standard CR2032 3-volt battery will work for your BMW X5 key fob.
What if my key fob still doesn’t work after replacing the battery?
If the key fob doesn’t work after replacing the battery, make sure the battery is installed correctly. If it still doesn’t work, the key fob itself might be malfunctioning and may need professional inspection.
Do I need to reprogram my key fob after replacing the battery?
No, you do not need to reprogram the key fob after replacing the battery. It should work immediately after the battery is replaced.
Conclusion
Replacing the battery in your BMW X5 key fob is a simple task that can be done in just a few minutes. By following this guide, you can ensure your key fob remains functional, saving you from potential inconveniences. For more information and to purchase the required battery, visit Amazon.