How to Replace the Battery in Your Cadillac XT6 Key Fob (2020 – 2021)

Introduction

Replacing the battery in your Cadillac XT6 key fob is a straightforward process that can be done at home. In this guide, I’ll walk you through each step, ensuring you can complete the task in under five minutes.

Materials Needed

Before you begin, gather the necessary materials. You’ll need a CR2032 battery and a flathead screwdriver or a similar tool.

• CR2032 battery
• Flathead screwdriver

If you don’t have the battery, you can easily purchase it online. I recommend getting it from Amazon for convenience.

Step-by-Step Guide

Follow these steps to replace the battery in your Cadillac XT6 key fob:

Removing the Internal Key

First, locate the button on the bottom right of the key fob. Press down firmly on this button while pulling out the internal key. This might require some effort, but once the button is pressed, the key should slide out smoothly.

Prying Open the Key Fob

Next, you’ll use the internal key to pry open the back section of the key fob. Insert the key back into the keyhole just enough to catch on the lip. Be careful not to insert it too far, as this will make prying difficult.

Once the key is in place, gently pry up to create an opening. You should feel a snap as the back section begins to separate. Use your fingers to pull apart the two halves of the key fob.

Removing the Old Battery

With the key fob open, you can now remove the old battery. Use a flathead screwdriver or a similar tool to gently lift the battery out of its compartment. Dispose of the old battery properly.

Inserting the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing down. Click the new battery into place, making sure it is secure.

If you need to buy the battery, you can find it on Amazon.

Reassembling the Key Fob

After the new battery is in place, align the two halves of the key fob and press them together until they snap back into place. Finally, reinsert the internal key by sliding it back into its slot.

Conclusion

Congratulations! You’ve successfully replaced the battery in your Cadillac XT6 key fob. This simple process saves you time and money, allowing you to keep your key fob functioning without a trip to the dealership.

If you found this guide helpful, feel free to leave a comment or give it a like. For more tutorials on key fob maintenance, visit our website.

FAQ

What type of battery does the Cadillac XT6 key fob use?

The Cadillac XT6 key fob uses a CR2032 battery.

Do I need any special tools to replace the battery?

No special tools are required. A flathead screwdriver or a similar tool will suffice.

How long does the replacement process take?

The entire process takes under five minutes.

Can I damage my key fob by replacing the battery myself?

As long as you follow the steps carefully, you should not damage your key fob.

What should I do with the old battery?

Dispose of the old battery properly, following local guidelines for battery disposal.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from Amazon.

Is there a way to get more help if needed?

For additional help, you can visit our website or check out more video tutorials on our channel.