How to Replace the Battery in Your Chevrolet Malibu Key Fob (2016-2021)

Introduction

Replacing the battery in your Chevrolet Malibu key fob is a straightforward task that you can easily handle at home. In this guide, I will walk you through the steps to replace the battery in your key fob for models from 2016 to 2021. You will need just a few tools and a new battery to get started.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before we begin, make sure you have the necessary tools and materials:

  • Flathead screwdriver
  • CR2032 battery

If you don’t have a CR2032 battery, you can purchase it online from Amazon.com.

Step 1: Remove the Internal Key

First, locate the silver button on the left side of the key fob. Press and hold this button while you pull out the internal key. This key will be used to pry open the back section of the key fob.

Step 2: Pry Open the Key Fob

Next, insert the key into the keyhole just a short distance. Be careful not to insert it too far, as it will lock in place. The goal is to pry the back section open. You should see a small seam in the plastic where the two halves meet. If you start prying and see the seam opening up, you are on the right track.

Step 3: Access the Battery

Once you have pried open the key fob, you will have access to the battery compartment. Use your flathead screwdriver or any similar tool to gently pry the old battery out of its slot. Dispose of the old battery properly.

Step 4: Insert the New Battery

Take your new CR2032 battery and make sure the positive side, which has the text and plus sign, is facing down. Align the battery correctly and snap it into place. Ensure it sits securely in the compartment.

Step 5: Reassemble the Key Fob

After inserting the new battery, reattach the two halves of the key fob. Simply set one half on top of the other and squeeze them together until they snap into place. Finally, reinsert the internal key into its slot.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

And that’s it! You’ve successfully replaced the battery in your Chevrolet Malibu key fob. This simple task can save you time and money compared to visiting a dealership. If you found this guide helpful, feel free to leave a comment or give it a like. For more information on key fob battery replacements, visit fobbattery.com.

FAQ

What type of battery does the Chevrolet Malibu key fob use?

The Chevrolet Malibu key fob uses a CR2032 battery.

Do I need any special tools to replace the battery?

No, you only need a flathead screwdriver and the new CR2032 battery.

How long does it take to replace the battery?

The entire process should take under five minutes.

Where can I purchase a CR2032 battery?

You can purchase a CR2032 battery online from Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Can I use the same process for different key fob models?

This guide is specifically for Chevrolet Malibu models from 2016 to 2021. However, the process may be similar for other models and makes.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.