How to Replace the Battery in Your Chevrolet Tahoe Key Fob (2015-2020)

Introduction

Replacing the battery in your Chevrolet Tahoe key fob is a simple task that can be done at home in under five minutes. All you need is a flathead screwdriver and a CR2032 battery. In this guide, I will walk you through the process step-by-step.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before you start, make sure you have the following tools and materials:

  • Flathead screwdriver
  • CR2032 battery

If you don’t have a CR2032 battery, you can easily purchase one online. I recommend buying the Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery for a reliable and long-lasting option.

Step 1: Remove the Internal Key

The first step is to remove the internal key from the key fob. Locate the button on the bottom of the device. It is a silver button located on the left side. Press and hold this button while pulling out the internal key.

Step 2: Open the Key Fob

Next, grab your flathead screwdriver. Look for the indentation right in the middle of the key fob. Avoid the two small indentations near the keyhole; you want the one below it. Insert your flathead screwdriver into this indentation.

Once the screwdriver is firmly in place, hold the device gently and give it a slight twist. You should feel the key fob crack open. At this point, you can use your fingers to pull the back off the device.

Step 3: Remove the Old Battery

With the key fob open, you can now see the battery compartment. Use the same flathead screwdriver to lift the old battery out of its housing. There are small indentations on the sides where you can insert the corner of the screwdriver to pry the battery out. Dispose of the old battery responsibly.

Step 4: Insert the New Battery

Take your new CR2032 battery and ensure that the positive side (marked with a plus sign) is facing down. Align the battery with the housing and snap it into place. It is crucial that the battery is oriented correctly for the key fob to function properly.

If you need to purchase a new battery, you can find one here.

Step 5: Reassemble the Key Fob

Now, it’s time to put the key fob back together. Align the two halves of the key fob and press them together until they snap into place. Finally, reinsert the internal key by sliding it back into its slot.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Congratulations! You’ve successfully replaced the battery in your Chevrolet Tahoe key fob. This simple process can save you time and money compared to visiting a dealership.

If you found this guide helpful, please let me know in the comments or by giving this post a like. For more tutorials on key fob battery replacements for various makes and models, visit FobBattery.

Frequently Asked Questions (FAQ)

What type of battery does the Chevrolet Tahoe key fob use?

The Chevrolet Tahoe key fob uses a CR2032 lithium coin cell battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from various online retailers. I recommend buying from Amazon for convenience and reliability.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

How often should I replace the key fob battery?

Key fob batteries typically last 1-2 years. If your key fob starts to show signs of low battery, such as reduced range or intermittent operation, it’s time to replace the battery.

Can I use any brand of CR2032 battery?

Yes, you can use any brand of CR2032 battery, but make sure it is a reputable brand to ensure reliability and longevity.

Is it safe to replace the key fob battery myself?

Yes, replacing the key fob battery is a safe and straightforward process. Just follow the steps outlined in this guide.

What should I do with the old battery?

Dispose of the old battery responsibly by taking it to a recycling center or a store that accepts used batteries.

What if my key fob still doesn’t work after replacing the battery?

If your key fob doesn’t work after replacing the battery, make sure the battery is installed correctly with the positive side facing down. If it still doesn’t work, there may be an issue with the key fob itself, and you may need to consult a professional.

Where can I find more information on key fob battery replacements?

For more information and guides on key fob battery replacements, visit FobBattery. They offer comprehensive resources for various makes and models, including a Chevrolet Key Fobs Guide.

Additional Resources

If you need further assistance or want to explore more guides, check out FobBattery. They have a wealth of information on key fob battery replacements for different vehicles.

For a specific guide on the Chevrolet Astro key fob battery replacement, visit FobBattery’s Chevrolet Astro Key Fob Battery Replacement Guide.

Thank you for reading, and good luck with your key fob battery replacement!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.